08 accord

Printable Version

Honda Accord >> Your Ride >> Headers, Intake, & Exhaust >> 08 accord

Page: [1]

Login Message << Older Topic   Newer Topic >>

08 accord - 7/17/2008 6:39:22 PM    Mr08accord Posts: 5 Joined: 7/14/2008 Status: offline i understand fujita is trying to work on a intake and an exhaust can be mounted on any vehicle but does anyone know of any headers that can be installed on a 2008 accord 2.4L? Post #: 1

RE: 08 accord - 7/17/2008 10:47:52 PM    03Sleeper Posts: 1896 Joined: 6/15/2006 Status: offline there should be. the block is similar to 7th gen and its kseries. check dcsports, etc. _____________________________ 2003 Accord LX Sedan I4| 5AT 101045 Injen SRI w/ AEM Dryflow| DCSports Ceramic Headers| DENSO IK20 Sparks| CF Front Strut Bar| Pioneer TSG950M 6x9s| Alpine SPS17C2 6.5"| C-Tek Slotted/Drilled Rotors | Progress 24mm Rear Sway Bar (in reply to Mr08accord) Post #: 2

RE: 08 accord - 7/17/2008 10:48:10 PM    03Sleeper Posts: 1896 Joined: 6/15/2006 Status: offline i had a long lengthy post that the STUPID forum wouldn''t let me post. _____________________________ 2003 Accord LX Sedan I4| 5AT 101045 Injen SRI w/ AEM Dryflow| DCSports Ceramic Headers| DENSO IK20 Sparks| CF Front Strut Bar| Pioneer TSG950M 6x9s| Alpine SPS17C2 6.5"| C-Tek Slotted/Drilled Rotors | Progress 24mm Rear Sway Bar (in reply to 03Sleeper) Post #: 3

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Honda Accord Prices

Top 10 Posters
wheelbrokera 6562 sir_nasty 6303 falkore24 5003 00accordlx5s 3744 deserthonda 3536 19accord97 3078 jimblake 2926 smaglik 2515 rtexasf 2336 finch13 2114

New Vendors
Sportwing
AMSOIL - Performance Oil Technology