Honda Accord Forum   News   Classifieds   Photo Gallery   Member List   Calendars   Search   Contact HAF   Sponsors  
  Forum FAQ   Accord History   Honda Accord Recalls   TSBs   Timeslips   Register   Login  

Chip

  Printable Version
Honda Accord >> Your Ride >> Engine & Internal >> Chip Page: [1]
Login
Message << Older Topic   Newer Topic >>
Chip - 8/23/2008 10:23:16 AM   
accords own


Posts: 509
Joined: 7/10/2007
Status: offline
accords own's photo gallery
Does anyone know of a chip for my car (see sig) that would be equivalent to a Proceed or "Juice Box" chip for a BMW 335i? and if you dont know what im talking about with the BMW, i just mean a chip that increases torque and horsepower by alot. btw, im not sure if this post is under the right topic, but i didnt know where else to put it.

_____________________________

2006 Honda Accord EX Coupe AT l 4 Cyl V-TEC l Fujita CAI l DC Sports Header l GReddy SP2 Cat-Back l Neuspeed Strut Bar l OEM Front Underspoiler l OEM Rear Deck-lid Spoiler l Black Housings l Xenon Depot 8000K HIDs... and other stuff






Post #: 1
RE: Chip - 8/23/2008 10:40:11 AM   
RTexasF


Forum Monitor
Posts: 2357
Joined: 11/16/2004
From: Brownsville, TX
Status: offline
RTexasF's photo gallery
No such animal for Honda. If you want the ECU modified it must be removed, sent off, modified, returned, and installed. Jones Electronics (JET) is the only one I''m aware of that does it.

_____________________________

''''04 2.4l 5M EX Sedan
Neuspeed short shift kit
V-6 6 speed front strut/firewall brace
17mm rear anti sway bar
AEM Shorty
DC Sports SS Header
Kicker Speakers
JL Audio Clean Sweep
JL Audio Amp
200W Bazooka sub
V-6 OEM 7 spoke alloys

(in reply to accords own)
Post #: 2
RE: Chip - 8/23/2008 11:01:02 AM   
accords own


Posts: 509
Joined: 7/10/2007
Status: offline
accords own's photo gallery
yeah, i heard about JET but i havent heard of any actual feedback from a buyer. seems kinda shady. i wish there was a JB chip for Honda. my friend has a 335i and hes getting the newest JB chip called the JB3 and it literally is a 20 minute install tops and puts him up to 370+ whp and wtq (his only other engine mod is a dual intake). he has a little under 300 whp and wtq stock. not to mention this chip is only $150 or something close to that. if he gets an exhaust, downpipes, and an intercooler, he''ll be at 400 whp. insanee. You described it perfectly Texas, an "animal".

_____________________________

2006 Honda Accord EX Coupe AT l 4 Cyl V-TEC l Fujita CAI l DC Sports Header l GReddy SP2 Cat-Back l Neuspeed Strut Bar l OEM Front Underspoiler l OEM Rear Deck-lid Spoiler l Black Housings l Xenon Depot 8000K HIDs... and other stuff







(in reply to RTexasF)
Post #: 3
RE: Chip - 8/23/2008 1:14:23 PM   
RTexasF


Forum Monitor
Posts: 2357
Joined: 11/16/2004
From: Brownsville, TX
Status: offline
RTexasF's photo gallery
If you believe a $150 "chip" will bump an engine seventy horsepower I have a bridge in Brooklyn I''ll sell you.

_____________________________

''''04 2.4l 5M EX Sedan
Neuspeed short shift kit
V-6 6 speed front strut/firewall brace
17mm rear anti sway bar
AEM Shorty
DC Sports SS Header
Kicker Speakers
JL Audio Clean Sweep
JL Audio Amp
200W Bazooka sub
V-6 OEM 7 spoke alloys

(in reply to accords own)
Post #: 4
RE: Chip - 8/25/2008 10:36:42 PM   
03Sleeper

 

Posts: 1926
Joined: 6/15/2006
Status: offline
03Sleeper's photo gallery
It''s more or less a Radio Shack resistor that tricks the ECU into supplying more fuel into the air-fuel ratio mixture leading to more combustion. Ends up being more damaging than good. Hondata is the way to go...as well as an OBD1 conversion.

_____________________________

2003 Accord LX Sedan I4| 5AT 107000
Injen SRI w/ AEM Dryflow| DCSports Ceramic Headers| DENSO IK20 Sparks| CF Front Strut Bar| Pioneer TSG950M 6x9s| Alpine SPS17C2 6.5"| C-Tek Slotted/Drilled Rotors | Progress 24mm Rear Sway Bar

(in reply to RTexasF)
Post #: 5
RE: Chip - 8/28/2008 9:36:24 AM   
falkore24


Posts: 5932
Joined: 8/16/2007
From: Wayne, NJ
Status: offline
falkore24's photo gallery
If you want to upgrade a 335i, I''d go with DINAN Stage 3 ...... actually, I''d most likely go with DINAN for all BMW''s!!!

_____________________________

2006 Scion TC (ZPI-18G pending)
2000 V6-AT (RIP 3G)

Temp Search thanks to Finch13


(in reply to 03Sleeper)
Post #: 6
RE: Chip - 8/28/2008 9:47:20 AM   
live2rice



Posts: 3443
Joined: 10/18/2006
From: Keene, NH/New Haven, CT
Status: online
live2rice's photo gallery
as far as your accord situation goes............its almost impossible to find something for OBD2...............and a AT on top of it yours just screwed

_____________________________


quote:

ORIGINAL: hondadude
I would not put a fram filter on a lawnmower engine...

1997 Fiji Blue Pearl CD7
1995 Sage Green Metallic CD5

(in reply to falkore24)
Post #: 7
RE: Chip - 8/28/2008 10:14:52 AM   
falkore24


Posts: 5932
Joined: 8/16/2007
From: Wayne, NJ
Status: offline
falkore24's photo gallery
no chips for honda ecus

piggyback systems or better only


_____________________________

2006 Scion TC (ZPI-18G pending)
2000 V6-AT (RIP 3G)

Temp Search thanks to Finch13


(in reply to live2rice)
Post #: 8
RE: Chip - 8/28/2008 10:21:28 AM   
Fenix


Posts: 862
Joined: 9/1/2006
Status: offline
Fenix's photo gallery
quote:

ORIGINAL: RTexasF

If you believe a $150 "chip" will bump an engine seventy horsepower I have a bridge in Brooklyn I''''ll sell you.


Sorry RF i already sold that one. The 59th St bridge is available, but its free so theres no return on investment.

_____________________________

04 EX 4cyl 5AT Coupe
Fujita CAI
Custom Heads & TYC Tails
Apexi WS2 Cat Back Exhaust
Front Grill
Interior LED rods(7color)
20% Tint
TSX Intake Manifold
DC Ceramic Header
Ralco Light Weight Pullies(In Hand)
TL-s Front Sway Bar

(in reply to RTexasF)
Post #: 9
RE: Chip - 8/28/2008 4:17:43 PM   
finch13



Posts: 4278
Joined: 6/7/2007
From: St. Paul, MN
Status: offline
Phearable.net will chip an ECU for you and moates.net has things to chip it yourself. Chipping an OBDII AND an A/T is a pain. I chipped a P28 ECU and used a Moates.net Burn1 EEPROM burner on my 5th gen. Unless you are going nitrous, forced induction, or some extreme NA setup, I''d stay away from ECU tuning. I just gave myself a headache talking about it.

_____________________________

USE ME TO SEARCH HAF

PWOTY 2008!

(in reply to Fenix)
Post #: 10
RE: Chip - 8/28/2008 4:21:39 PM   
live2rice



Posts: 3443
Joined: 10/18/2006
From: Keene, NH/New Haven, CT
Status: online
live2rice's photo gallery
quote:

ORIGINAL: finch13

Phearable.net will chip an ECU for you and moates.net has things to chip it yourself. Chipping an OBDII AND an A/T is a pain. I chipped a P28 ECU and used a Moates.net Burn1 EEPROM burner on my 5th gen. Unless you are going nitrous, forced induction, or some extreme NA setup, I''''d stay away from ECU tuning. I just gave myself a headache talking about it.

if you notice on phearable. net, they only tune for manual trannies


_____________________________


quote:

ORIGINAL: hondadude
I would not put a fram filter on a lawnmower engine...

1997 Fiji Blue Pearl CD7
1995 Sage Green Metallic CD5

(in reply to finch13)
Post #: 11
RE: Chip - 8/28/2008 4:23:28 PM   
finch13



Posts: 4278
Joined: 6/7/2007
From: St. Paul, MN
Status: offline
Yeah, never looked into them that much, just know they did it. When I was involved with chipping it was more of a hit or miss experiment thing.

_____________________________

USE ME TO SEARCH HAF

PWOTY 2008!

(in reply to live2rice)
Post #: 12
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
 
Honda Accord Forum >> Your Ride >> Engine & Internal
Jump to:




Featured Sponsors
Advertising Info

Top 10 Posters
wheelbrokera7083
sir_nasty6309
falkore245932
finch134278
00accordlx5s3815
deserthonda3575
live2rice3443
jimblake3272
19accord973171
smaglik2623

New Vendors
Sportwing
AMSOIL - Performance Oil Technology

Honda Accord Forum .com is not affiliated with or endorsed by Honda Motor Company.