slayer712accord
3/18/2008 6:02:12 PM
just bought a 95 honda accord v6 auto shifts hard from first to second but usually not when cold fluid seems to be full and doesnt smell burnt check engine light turned on shortly after bought and tachometer stops working after warm i was just wondering if anybody knew where i should start if the engine light is tied in to the tranny or the tach has something to do with the way it shifts ?????
TexasHonda
3/18/2008 6:08:21 PM
Yes, it's possible. See DIY section for instructions on how to pull codes. Trans code is same as engine except the D4 light flashes instead of Check Engine Light.
good luck
00AccordLX5spd
3/19/2008 7:22:13 AM
My V6 shifts kind of hard sometimes too.
About the tachometer.....does it bounce intermittently? Does it work sometimes but not all the time? Does the engine seem to "shudder" a bit when the tach is not working? Get back to me on those, I may be able to help you resolve your tach issue.
Oh and by the way, the 95 V6 is OBDII. There is a plug in port to pull the "check engine" codes behind the ash tray. Pull the ash tray rearward to see the port. Take the car the AutoZone or Advance Auto Parts and have them pull the codes with their code reader. They will do it for free. Post the code numbers here. The codes should be in the format of PXXXX.
slayer712accord
3/25/2008 1:33:27 PM
yea as a matter of fact it does shudder a little bit and i dont know if its related to the trans or not but at speeds like 35 45 55 and so on it seems to jump in and out of like fourth its weird
slayer712accord
3/25/2008 1:35:47 PM
and also i went and picked up an obdII scanner but in the process of looking for the service plug they talked about i put a paper clip in the abs plug and now that has a code registered i dont know how to get rid of tried disconnecting the battery and now i dont have the service engine light it hasnt come back on my scanner found nothing real bummer....
