Cold Air Intake

So im having a hell of a time finding a Cold Air Intake for my 1995 Honda Accord Vtec V6 LX

I find all the 4 Cyl. But thats all i can find, ive searched everywhere, if anyone knows where i can find one let me know.
Im almost tempted to go make my own.....

And does anyone know if i can install just one header on my v6? Or do i HAVE to have 2 headers....

Intake - http://store.summitracing.com/partdetail.asp?autofilter=1&part=GRM%2D10%2D247&N=700+4294907813+4294907606+4294924744+4294839789+4294925239+4294849633+115&autoview=sku
 
Ebay has a bunch of intake as well. Don't think anyone even makes headers for your motor.

Um it would be smart to do both headers instead of one

www.ebay.com

Yeah thanks for finding me a site that sells V6 model intakes, ebay doesnt have any for 6 cyl.

As for headers, ive only been able to find one site that sold them for V6 Accord's and i lost that since then, so if anyone wants to help me find some thatd be cool.

i don't know of anyone who mkes headers for the 2.7. sorry

I found some but they didnt look to well built so i passed them up, they had a black powder coat on them too....I dunno i just dont trust alot of products these days.

They were probably made by Pacesetter..you don't anything from them.

quote:

ORIGINAL: Joseph

Yeah thanks for finding me a site that sells V6 model intakes, ebay doesnt have any for 6 cyl.

As for headers, ive only been able to find one site that sold them for V6 Accord's and i lost that since then, so if anyone wants to help me find some thatd be cool.

 
Maybe search a little better. Atleast half of the intakes in this link are for V6's....
 
http://search.ebay.com/95-accord-intake_W0QQfromZR41

just call AEM, or call a tune shop around your area, aem is the best to go with intake, and as far as headers, LOL you need two of them if you have a v6 one for each side, sucks with the v6 the engine has to be lifted for the headers swap, takes much longer and cost more, for the v4 its way easier, but i dont know any company that makes them for your year, call around

if your on a budget, go to home depot and buy a bunch of PVC pipe and fittings. diy CAI right there! (im not joking... diy stuff is cool...)

well i was just going to the same place i got my exhaust done and have them fit a pipe that will fit and then get a filter and fit that on aswell.... PVC lol......

nafango, DIY PVC headers as well? jp

i've seen PVC intakes, and even some made of pringles cans or air-duct materials...

as for the header, i'm sure that'd be way too hot and melt the pvc eventually.

not to mention downright silly

I know...a joke. Gooey platic all over!

ackimoto is supposidy the only one for a cold air intake for the v6.  I'm having issues finding one myself.

ouch, that's not good.. was looking to get a v6 myself

quote:

ORIGINAL: klrspz

ouch, that's not good.. was looking to get a v6 myself

<3

most of the kits I've looked at on the bay are only a warm air intake.

I've only found one dealer in regards to a true cold air kit for the v6 accords and that is akimoto.

I priced it out and they are around $289.

I told the wife about it she said we I guess I have to save my pennies since I want it.

I thought that owning a v6 accord would be easy. 

This is the 3rd car that I own that is a bitch for getting parts.

Instead of "warm air intake" please refer to the system as SRI or short-ram intake ...... more common .... trying to avoid confusion.  Also, please curb the verbage and add your car info to your sig.

curb the verbage rofl....

sorry I offended.
 
I've heard it called a warm air intake as long as I've been around cars.  due to it sucks warm air from the engine.
 
I thought of asking my friend if he can get a group buy discount to bring the price down.
 
Everybody I've talked to says that is the one issue with the v6.