izncate
7/13/2007 6:19:33 PM
gonna buy some springs soon to put on the car. right now the front of the car is higher by about 1/3 of an inch. so i wanted to put on some tanabe's or h&r's with a 1.5 drop in front and 1.2 in the back. i called a local performance shop and they said i shouldnt do that if i am not installing a whole new suspension, ie camber, new struts, etc. (don't have the funds yet). he said that the factory springs are set right now where the front is higher than the back. if i install springs with a bigger drop in front, it's going to be front heavy and look too low in front. he said i should go with even springs at all four corners, ie 1.5 inch all around, and my car would even out. what are your thoughts?
