Headlights

I am buying an 04 accord, but I hate the style of headlights...i like the euro style of the tsx...does anybody make a different headlight assembly that alters the look at all...i know some older acuras had kits that gave the integra's lights the look of smaller round  headlights....is there anything out there for accords????

Lots of stuff out there for accords.... here's a quick e-bay search that I just ran...


http://search.ebay.com/search/search.dll?cgiurl=http%3A%2F%2Fcgi.ebay.com%2Fws%2F&fkr=1&from=R8&satitle=04+accord+headlights&category0=&submitSearch=Search

I have these.
 

Trav20, have you adjusted your headlights? cause i have the same ones, basically, and the light shines into other peoples cars. Did u use the stock headlight adjusters? or is there another way?

No I cant figure that out either. The only thing that even looks like can adjust it is the 6 3-4 inch bolt things on the back of one light. I tried it but I don't think it works.

well keep me posted if you find a way, cause my high beams are pointing to the top of the trees

It is those bolts!! man i didn't think itd work but thats how you adjust them.  You will have to take out the battery for the drivers side tho which is a pain bc you have to take it out and put it back in to check if they are even.

can you see with those dual halo projectors with an hid kit?

hey guys, i have these headlights installed in my car but the leds are blinking on one side and the other started blinking and went out altogether.
 
I had these installed "professionally" and i have no idea how they're wired or how they should be wired.
 
any body, please????

They probably wired them to to high of a voltage and they burned out.  Ecspecially if they were blinking and are now not working.

too high a voltage? isn't everything 12 volts in an american accord?
 
Is it possible the leds are not 12 volts and have some kind of type of voltage regulator or converter?
 
Anyone familiar with installing these lights?

Well it depends, in my generation of Accord, the parking lights (corners are only 5 volts).  Most LED's are usually desing for 3.4 volts (around there) and I doubt the projector headlights put resistors in there.  That is why everyones halo rings burn out.  I had projectors on my car and hooked them up to 5v and they didnt burn out.

makes sense. one of my halos burned out already along with my leds.
 
thanks for your input. i'll test that out.
 
i wonder if i could replace them with 12 volt bulbs

wass uP every one, TRAV Nice front lights, etrezet there are a lot of kits, do reseach your getting an newer model then what i have so the lights are diffrent, but i have a TSX projection kit, i got my kit from www.customlightz.com I highley recommend them they retro fit what ever you want, many diffrent choices, hope this helps FOX