how to remove tail lights?

does anyone have or know a DIY to remove the smoke the tail lights for a 04 Accord? I removed the screws but there's somethign still holding it in. Any help with be appreciated. thanks!

I was wondering who is Rich enough to even own a 2004 Honda .

Seriously tho...I will ask my local Honda guru tomorrow when we have eggs and bacon at Mickey Deeee's, he will know. Then I will post it if he know's

Later Lobi126
WheelBrokerAng


Thumbnail Image

a few guys on a local board around here have smoked the tails on 04 accord coupes

http://www.bwimports.org/forums/

there is the link jsut do a search and you should be able to find the thread

i think they are just glued with that rubber, no? have you tried to move them? ....easy....

I FINALLY know how to remove the tail lights on 04+ Accords. I have an 05 Accord, but it's a sedan. Here's the thing. The tail lights are connected by the bumper so you have to take the bumper off. Once you do, there are screws holding the tailights in place by a black metal piece. If you guys take the screws from inside the trunk first, you might wonder why they're not moving...that's the reason. There's a metal piece that's attached to the bumper and you have to take the bumper off. Hope that helps.

thats the same thing with the headlights on all accord.. theres a screw all the way at the bottom.. u have to take out the front bumper

dag i am glad my tail lights arent like that. But in reply to the lambo accord so ur saying if i got my accord projector headlights i would have to take the front bumper off? i have a 1996 honda accord. or were you just talking about newer models?

yea you have to take the bumper off to put on projector headlights i had them and hated um after a while

No im talking about the 96.. i used to have one..

There is a bolt all the way at the bottom of the lights near the lower part of the car.



Notice teh black thing.. that bolts deep down...
Theres 2 ways to take it off...

1. (*The Proper Way*) Remove the bumper and unscrew it.
2. (*the way i did it*) RIP out the head light and just F**k The bolt on the bottom

pick which ever u like best :)