old but old.

how much pounds of boost will take to run 500hp
what needs to be replace besides all the internals
resleeve and wat kind of turbo gt-35 or will the garrett t3 t4 will
be able to push that much..no h22 fully f22...
rather go with the f20b then h22 thanks guys
just want info and any help so i can learn and b prepare in the
next couple of yeaars...thanks

One to many variables to give you an accurate answer.

wow............alot of parts,alot of research and ALOT OF MONEY my friend...i know people that have boosted their V6 on the 6th generation around 300's but i've never seen anyone hit 500 yet...but hey anything is possible....just make sure you have a never ending fountain of money because i'll tell you now...you're looking at around 10,000's right now..

A 10 lb can of nitrous, assuming constant and full pressure (aka a ton of heat) will give you 500HP for 12 seconds.  You will also need a full secondary fuel line and high pressure, high volume fuel pump and a new engine.  Chances are that your engine will withstand about 3 of the 12 seconds before the head gasket blows out, the rods shatter and the nitrous burns holes through all ofthe pistons.  Then, the oil ignights, burns back through the intake, lights up the filter ..... and you better pray that the fuel pressure regulator(s) keep the flame from your fuel lines.
 
Other than that, why not?

to best summarize what he said i think a proper illustration will do...
 

Shadow1992 has not been on here since November of last year, but he used to be a great help with turbos and other stuff.  I'll copy and paste what his signature says he has:
1992 Accord EX
massively modifed H22A
2.5L stroker kit
GT35R turbo @ 24psi
459 whp
404 ft-lbs torque
 
As you can see ^, he has an H22 that has been stroked and probably doesn't much resemble an H22 anymore.  He's pushing 24psi and isn't getting 500hp.
I doubt you're gonna get 500 out of an f22 without spending at least $50k on it.  Total waste of $ IMO. 

500hp in a FWD car=completely worthless

thanks guys
im not going with nitrous im skared...lol
money yea its an issue but dats what i want the f22...
yea i seen shadows signiture dats why i put this post...
i dont really care if its front wheel its just for my pleasing u know..
if that i rather get an old datsun and put a skyline engine....lol 
 
but can it been done to a long long long long point can it be done....lol

In dreamland, anything can be done.

Oh yeah I'm sure it is possible.  It is probably possible to get 1200 hp out of it even. But the finished freak of an engine probably would not resemble an f22 anymore haha

I don't think any open deck 4 cylinder motor will get over 600HP, no matter what you do.

the skyline motor is a legend man....i have a video here of it kicking 1200HP and i have another kicking 1130HP...that motor is crazy..
http://youtube.com/watch?v=VQoQhDXeT_I
 
And why would you wanna put a skyline motor in a Datsun?
 
why not get a 96 nissan 240SX and then drop the motor in that...that makes more sense..

It's also an inline 6 with a cast block.

why put it on a datsun well its old no more smog for one..
no 1 will expect that a old car will have that nice engine in there...
hella unique...240sx are kinda hard to get expensive
and hell yes that engine and car is a legend dude i seen does videos man oh man
(wet dreams about them...lol)
 
o well if it can get over 600hp its ok i just want at least 400 or so...lol
well yeah in my little dream world ill try to make the best of it...
 
maybe by slapping a couple of stickers i can get more out of it....huh...lol

california emission
 

quote:

ORIGINAL: HORSEPOWERJUNKIE2007

the skyline motor is a legend man....i have a video here of it kicking 1200HP and i have another kicking 1130HP...that motor is crazy..
http://youtube.com/watch?v=VQoQhDXeT_I

And why would you wanna put a skyline motor in a Datsun?

why not get a 96 nissan 240SX and then drop the motor in that...that makes more sense..

 
Horsepower to weight ratio. 240's are pigs compared to a datsun 510.

what exactly do u mean datsun its a pig compare to 240

hold on i got this on wiki. on the 240sx

The wheelbase of the car grew 2 inches, while the overall length of the vehicle was slightly shorter than the S13. The curb weight of the vehicle went up about 23 pounds from the S13 with the SE at 2753 lb (1249 kg).
 
CAR WEIGHT: 2131lbs (NO driver, 1/2 tank) 53.17%F/46.83%R
Equipment : Full interior, more details. L20B/5-speed/R160LSD

quote:

ORIGINAL: falkore24

I don't think any open deck 4 cylinder motor will get over 600HP, no matter what you do.

 
I saw a 4cyl eclipse on one of those drag racing shows one time that had 1800 hp on a 4cyl.  i have no idea what they had done to the motor though.  And it was RWD.  It ran off alcohol.

Again, it's a cast iron block, not an open deck.

quote:

ORIGINAL: DA KID RYU

what exactly do u mean datsun its a pig compare to 240

 
You're misreading it.

do they even still make datsun?its been a while..

He meant 240's are pigs, not datsuns
 
Datsun was discontinued in March 1986.  They used to be a branch of Nissan.

yeah..my dad has one actually in the driveway...does it look like this?because i just realized it...

his is a 240ZX.the battery doesn't work on it and its funny because its been covered for a while..i was calling it a 240ZX the whole time but this morning he took the cover off and i was looking at it on the back it said datsun and i was shocked...

i'll take pictures of it tomorrow

thats right datsun was a part of nissan...
oohhh thanks for straighting that up..00accord and blkcurrant.....
hahaha u have a datsun and didnt know it...
dats koo

no its my father's,he's working on it now and then and i didn't realize what it was.
 
he has an 08 sonata,and he has that one...i'm not sure which year is it though i know it looks like its fast.