Projectors! Now with Pics!!

Well I got them installed and it took forever! For some reason, my other computer wont hook up with HAF so I cant put up pics.  They look nice though and I hooked up the rings to 5w so they should last alot longer.  Anyways, the light output for the highs is great but the lows are terrible.  I am going to try and aim them up.  Seems, as though they are pointing down.  Do you guys think some Silverstar Ultras would help quite a bit?  I am wiling to send $55 to avoid hitting a deer.

Thanks:)

2 questions for you: 1- which way should i go for my 97 accord lx? projectors or JDM Accord SiR headlights? is it possible to use HID or Xenons for both?

Its up to you dude.  I love the look of projectors, but the light output...well itll need some work.  With most projectors you cannot use HID's..  Idk, bout the other headlights though.  Goodluck!

Well here they are!  I love the look!

Okay, one problem though.  If you have any ideas PLEASE help.

The high beams are great.  I just bought Silverstars for the lows and the output is horrible.  Well, actually they are fine, its the the projector lens for the lows (not the whole housing) is pointed down inside the housing.  If they were up I would think it would be fine.  I try to pry, the lens comes up a little then it goes back down. So any ideas?  Or should I simply buy some driving lights to use with my lows?  Are there any legal ones out there?  The last pic shows my output, those were with the bulbs that came with the projecotrs not the silverstars.  After putting in the SS's it got worse.  So I guess just putting them in made the beams point lower.


Thanks for any help guys.  My parents would kill me if they knew how these were at night.  So I need to do something ASAP.



Thumbnail Image



Thumbnail Image



Thumbnail Image



Thumbnail Image



Thumbnail Image

Anyone? 

is there no kind of adjustment bolt? i know my stock headlights have them and some ppl say most afterheadlights have them too. it looks like a regular bolt but somwhat like a gear on the side that you can stick a phillips scredriver in

hey 97 accord, how do i lower my head lights? Cause when im driving at night it seem like one of my head lights is higher than the other one. When i look at it from afar a way i can tell that one of them is higher than the other one. Is there an adjust screw to lower it?
 
1998 accord sedan
4 cyl

I dont think there is.  If so, our headlights are completely different so idk.
 
Anyone have any ideas for me? Ill probably take them back off in a couple days but it Looks like Im gonna have to get some driving lights....ugh

see if you can call the company and ask them if theres an adjustment screw

if they are the halo type, there should be 2 adjusters for the high's and 2 for the lows, the light output is so so, i have a set on my car and had to really aim them to get them good. now i need to figure out which headlights to do a hid retrofit on. the halo's or stocks.

im going HID on my stocks, i also painted the interior of the stocks black. I hate my projectors, and the halos burned out in less than 6 months. ill up pics when i get them done. But i have so many projects going on at once its hard to figure out which one to pay attention to

quote:

ORIGINAL: y9pema

if they are the halo type, there should be 2 adjusters for the high's and 2 for the lows, the light output is so so, i have a set on my car and had to really aim them to get them good. now i need to figure out which headlights to do a hid retrofit on. the halo's or stocks.

 
Hello!  Where are the adjustment screws?  I gues im a moron for not seeing them! lol thanks!

quote:

ORIGINAL: Fenix

im going HID on my stocks, i also painted the interior of the stocks black. I hate my projectors, and the halos burned out in less than 6 months. ill up pics when i get them done. But i have so many projects going on at once its hard to figure out which one to pay attention to

 
Hey Fenix, did you have your halos hooked up to 12v?  I think they dont really have a resistor, therefore it completly destroys the leds.  I wired them to the 5v side lights,

quote:

ORIGINAL: 19Accord97

quote:

ORIGINAL: y9pema

if they are the halo type, there should be 2 adjusters for the high's and 2 for the lows, the light output is so so, i have a set on my car and had to really aim them to get them good. now i need to figure out which headlights to do a hid retrofit on. the halo's or stocks.

Hello!  Where are the adjustment screws?  I gues im a moron for not seeing them! lol thanks!

on mine there are two silver phillips head looking screws in the hardest possible place that you could put them. should be to the bottom right on driverside and bottom left passengerside.i never hooked up the halo's.

Thank you so much!  I would have never guessed those were for that!  Thanks!!!!!! :D :D  They look pretty good now!

im glad you got your problem fixed
can we possibly see a new output picture?