Replacing Headlights on a 92 Accord

Hi guys I recently bought replacement headlights for my 92 Accord 4 Door and I'm wondering if you guys can give me any tips on how to take em off, and if theres any precaution I should look into i.e removing the Negative Battery Terminal. Any help would be greatly appreciated.
 
Thanks

1) Unplug electrical connectors and bulbs
2) Remove the bumper turn signals by removing the screw, and rotating the assembly out, remove the bulb
3) Remove the grille and front bumper
 a) to remove grille remove the 5 screws along it's top and with a flat tipped screwdriver, press down on the retaining clips at the ends of the grille
 b) to remove the bumper remove the two retaining nuts located behind and below the headlamps, you can see them by looking down from above the lamps. Then with the bumper turn signals removed, look through each you should see two bolts on each side, remove them. Lift up slightly on the bumper and pull it off
4) Remove the lamp turn signals by removing the retaining screw, if your headlamp is not one assembly (some 92 and 93 models the turn signal was part of the headlamp)
5) Remove the 5 screw holding the headlamp, 2 on top and 3 along the bottom.
 
You may want to remove the battery and relocate the coolant reservoir to better get at the right headlamp and right bumper retaining nut, but you don't have to. 
 

Thank You SIr will definitely try it out this weekend

OK on schedule for replacing them and when I unplugged the plugs, the turn signal ones are broken so from the looks of it I might need to make a new housing for those two any suggestions? plus since I might have to do it all again wheres a good place to shop for an aftermarket grill?

The bumper signals or the ones next to the headlamps? Is it the lens or the plastic part that holds the bulb?

The ones on the Headlight and it was finally dark enough to test the lights and I noticed that its not casting enough, and 2 of the 4 bulbs aren't working, did I do something wrong somewhere?

ok never mind made like a good mechanic and retraced my steps finally got it working gonna test it again tonight. thak you Sir nasty for the advice