Welcome to the Honda Accord Forum - Honda Accord Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
How to replace popped out Cruise Control CANCEL Button
On one of my recent road trips, I was using Cruise Control and as I hit 'CANCEL' button, the button popped out of its place. The button isn't broken, however I am having tough time putting it back in place.
The other two buttons RESUME (accel), SET (decel) buttons are just fine and working. For now, I am using the brake pedal to cancel the cruise. More than the lost function, an open spot looks ugly.
I just had 60K mile service done at Honda Service Station and was hoping the service center could fix the button back in position. I was asked to buy a new control that would amount to about $50. Seems like a waste for just a button that just popped out of its place
It seems like if I depress the ends of the button with holes (that should go into prongs/projections and sit in) and push, it should work but there isn't enough room. Would it help to unscrew the control? Any suggestions are appreciated.
Honda 2001 Accord EX, 4-Dr Sedan, (61K miles)
This ad is not displayed to registered members. Register your free account today and become a member on Honda Accord Forum!
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for HondaAccordforum.com content, comments, or advertising. HondaAccordforum.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse HondaAccordforum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.