Urgent! need help please. Pulling ulev vtec to replace non-vtec. Need parts list.
#1
Urgent! need help please. Pulling ulev vtec to replace non-vtec. Need parts list.
I am pulling a f23a4 ulev vtec TOMORROW, for a 99 accord that I bought for my mom with a non-vtec f23a5, that needs to be rebuilt. It was left in the rain for a couple months and it's cheaper just to get a different engine from the junk yard.
I really need a list of all the parts I need to pull. I'm surfing similar threads right now. Any help is greatly appreciated!
I really need a list of all the parts I need to pull. I'm surfing similar threads right now. Any help is greatly appreciated!
#2
My parts list so far is:
Money
Engine
ECU
Intake/exhaust manifolds. (or can I use my a5 manis?)
Wiring harness(or can I use my old one?)
Map(will I need that?)
Vacuum control box
Distributor/Ig coil
Possibly engine mounts(?)
Possible Radiator.
Oxygen sensors.
Will I need the fuel pump?
Money
Engine
ECU
Intake/exhaust manifolds. (or can I use my a5 manis?)
Wiring harness(or can I use my old one?)
Map(will I need that?)
Vacuum control box
Distributor/Ig coil
Possibly engine mounts(?)
Possible Radiator.
Oxygen sensors.
Will I need the fuel pump?
Last edited by 99accordf23a5; 05-06-2014 at 01:01 AM.
#3
I used to have a 98 & I had the shop manual. I recall the ULEV car had a lot of differences in the wiring harness. The pin-outs for the ECU were very different. You'll want a Helm shop manual to get all the details about re-wiring.
Thread
Thread Starter
Forum
Replies
Last Post
cd51994accord
Engine & Internal
8
01-30-2014 12:56 PM
05_accord
General Tech Help
4
04-18-2013 06:05 PM
top end ms
PRIVATE For Sale / Trade Classifieds
9
02-14-2008 12:35 AM