invidia or apexi?

Printable Version

Honda Accord Forums >> Your Ride >> Headers, Intake, & Exhaust >> invidia or apexi?

Page: [1]

Login Message << Older Topic   Newer Topic >>

invidia or apexi? - 7/14/2008 9:13:34 PM    drummer8332   Posts: 15 Joined: 4/9/2008 Status: offline hey guys ive got a 98 accord ex and i want to get an exhaust for it. i was looking for a nice deep tone and ive come between the delema of the invidia n1 or the apexi ws2.  I hear the apexi hangs pretty low and i havent heard if the invidia does or not.  Which one do you think I should go with? Post #: 1

RE: invidia or apexi? - 7/14/2008 9:52:05 PM    03Sleeper Posts: 1896 Joined: 6/15/2006 Status: offline apexi ws2 i have never heard of the brand invidia....and the product (n1) is actually derived from an apexi application. so im guessin invidia is along the lines of tsudo....eBay cheap. _____________________________ 2003 Accord LX Sedan I4| 5AT 101045 Injen SRI w/ AEM Dryflow| DCSports Ceramic Headers| DENSO IK20 Sparks| CF Front Strut Bar| Pioneer TSG950M 6x9s| Alpine SPS17C2 6.5"| C-Tek Slotted/Drilled Rotors | Progress 24mm Rear Sway Bar (in reply to drummer8332) Post #: 2

RE: invidia or apexi? - 7/15/2008 5:58:33 AM    falkore24 Posts: 5003 Joined: 8/16/2007 From: Wayne, NJ Status: offline WS2 is an oval design, so the can is going to sit higher than an EVO.  It''s most likely higher than most round designs, but that N1 might be a small enough can that it sits as high.  I had the WS2 setup.  It has a real nice tone, but it is quiet.  Above 2500 rpms, the Injen CAI was louder (listen to the second video).  I had Tein SS coilovers on the car also.  I could pull into the driveway headfirst no problem, but pulling out headfirst could scrape the pipes on the sidewalk ..... so don''t back in or pull out headfirst.  We have 5 cars in my driveway, so sometimes it was hard or impossible to back out. Here are some videos: WS2 in my driveway 0-60 run in the car _____________________________ 2006 Scion TC Short Shifter radiator panel fully lit 3rd brake light strut bar 4pt rear bar sways S-pipe pulley poly bushings poly mounts ETD air horns pending ZPI turbo system 2000 V6-AT (RIP 3G (in reply to 03Sleeper) Post #: 3

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Honda Accord Prices

Top 10 Posters
wheelbrokera 6562 sir_nasty 6303 falkore24 5003 00accordlx5s 3744 deserthonda 3536 19accord97 3078 jimblake 2926 smaglik 2515 rtexasf 2336 finch13 2114

New Vendors
Sportwing
AMSOIL - Performance Oil Technology