Honda Accord Forum   News   Classifieds   Photo Gallery   Member List   Calendars   Search   Contact HAF   Sponsors  
  Forum FAQ   Accord History   Honda Accord Recalls   TSBs   Timeslips   Register   Login  

slipping problems

  Printable Version
Honda Accord >> General >> General Tech Help >> slipping problems Page: [1]
Login
Message << Older Topic   Newer Topic >>
slipping problems - 3/18/2008 7:26:09 PM   
joshk5145


Posts: 16
Joined: 1/31/2008
Status: offline
what would make my trans. slip in every gear? i know it's electrical so that might narrow some things down. i think it has s-thin to do with the shift solenoid. i took the ecm out and i get power in reverse, d4,d3,2 but not 1( on one wire) and i get the power down at the solenoid. i changed out solenoids from my old trans but it didn't change. (but my other trans did the same thing right b4 it burned up) the problem started after i put the transmission back in the car. i had taken it out to have the seals redone but i guess i forgot to unplug the shift solenoid and torque converter solenoid. so i know it has s-thin to do with it, the wires pulled out of the plug on the top ( wires comin from engine harness). where should i go from here? a shift solenoid is really expensive to me 300 at advance but they can't order it so i'll have to go to honda (trying not to do that unless i have too). any help would be greatly appreciated.
1996 accord lx f22b2 4-cylinder automatic aoya trans 
ok i just learned how to pull codes and i got them. on the check engine light i got 65, and the d4 i got 15. can anybody tell me what that means. i think the  engine light is just my o2 sensor but i don't know if the d4 uses the same chart or not. i got a Ignition Output Signal missing or defective ignition output signal for 15 but again i don't know if that is the right reason for that code


< Message edited by joshk5145 -- 3/18/2008 9:11:49 PM >


_____________________________

1996 lx accord
f22b2 auto
minor mods
more coming soon
Post #: 1
RE: slipping problems - 3/19/2008 6:23:50 AM   
BlkCurrantKord

 

Posts: 1332
Joined: 5/27/2007
Status: offline
BlkCurrantKord's photo gallery
The 65 is your 02 sensor. I dont see anything in my Haynes for a code 15. It maybe something you can only diagnose through honda's scanners.

_____________________________

Accord Mafia Member #001

(in reply to joshk5145)
Post #: 2
RE: slipping problems - 3/19/2008 9:18:55 AM   
00AccordLX5spd


Posts: 3815
Joined: 1/16/2007
Status: offline
Yeah I dont know what a 15 is either.
Hopefully one of the Honda Techs on here will see this thread and comment.  Or maybe someone that has a Helm manual will look it up.  BTW, if you check the DIY section, there are downloads for a Helm manual online for free.  but I'm not sure if it is for a 96 or not.

_____________________________

2000 Accord LX Sedan F23A1 5spd
-Short Shift Adapter
-eBay SRI w/ K&N
1995 Accord V6 Sedan AT - AKA "the money pit"
1991 Mustang LX 5.0 Convertible - my daily driver all through college - now sits in my dad''s garage - needs a little TLC

(in reply to BlkCurrantKord)
Post #: 3
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
 
Honda Accord Forum >> General >> General Tech Help
Jump to:




Featured Sponsors
Advertising Info

Top 10 Posters
wheelbrokera7085
sir_nasty6309
falkore245936
finch134287
00accordlx5s3815
deserthonda3575
live2rice3444
jimblake3280
19accord973171
smaglik2623

New Vendors
Sportwing
AMSOIL - Performance Oil Technology

Honda Accord Forum .com is not affiliated with or endorsed by Honda Motor Company.