Vid of my Kicker Comp CVR12 12"s w/ Alpine MRDM1005 video comments welcome
Login  | |
|
Vid of my Kicker Comp CVR12 12"s w/ Alpine MRDM10... - 4/17/2008 8:56:29 PM
|
|
|
ziggy!talon
Posts: 95
Joined: 4/2/2008
Status: offline
|
here's mine...
setup is 2x Kicker Comp CVR12 12" subwoofers, powered by a Alpine MRD10005 1000wrms x1, subs wired in series, so there getting 500wrms each...this is the most sub moving song i could find...trust me, it doesnt sound like this in real life, the cams mike just cant pick up what it actually sounds like (not surprising) in car, and a block or two a way it sounds loud and clean, no distortion at any volume...
i also hav a pair boston accoustics components up front VERY soon to be powered by a JL 150x2 amplifer i found a great deal on, that will be a HUGE improvement... my deck does 25wrms, so they dont sound bad, but i know they will really open up and sound beautiful with some real clean power...anyway, enough with the jibbber jabba....
here's the vid:
http://debscowboy.com/zanejohnson/P1010209.avi
for some reason it wont play in windows media player for me, but VLC player works perfectly fine, so if WMP wont work, try VLC
_____________________________
98 EX 5MT H22A-S swap, I/E, DR's in front
Lots of audio stuff
|
|
|
|
|
|
|
|
|
RE: Vid of my Kicker Comp CVR12 12"s w/ Alpine MR... - 4/17/2008 10:29:16 PM
|
|
|
finch13
Posts: 4278
Joined: 6/7/2007
From: St. Paul, MN
Status: offline
|
Sounds good man, what was the second song you played? And, what the HECK** happened to your front bumper?
< Message edited by WheelBrokerAng -- 4/18/2008 10:14:33 PM >
_____________________________
USE ME TO SEARCH HAF
PWOTY 2008!
|
|
|
|
|
RE: Vid of my Kicker Comp CVR12 12"s w/ Alpine MR... - 4/18/2008 6:48:23 AM
|
|
|
cxjon
Posts: 79
Joined: 2/7/2008
Status: offline
|
I think you got you wiring terms wrong.... not bad
_____________________________
96 Accord Ex fodo
Tein Basic Dampers
50% 3m window tint
Alpine iDA-X100 ipod deck
mnhondas.com < this is not a company
|
|
|
|
|
RE: Vid of my Kicker Comp CVR12 12"s w/ Alpine MR... - 4/18/2008 7:08:02 AM
|
|
|
cxjon
Posts: 79
Joined: 2/7/2008
Status: offline
|
504 boyz wobble wobble or something like that...
_____________________________
96 Accord Ex fodo
Tein Basic Dampers
50% 3m window tint
Alpine iDA-X100 ipod deck
mnhondas.com < this is not a company
|
|
|
|
|
RE: Vid of my Kicker Comp CVR12 12"s w/ Alpine MR... - 4/18/2008 8:18:16 AM
|
|
|
donpisto
Posts: 113
Joined: 4/17/2008
Status: offline
|
quote:
ORIGINAL: cxjon
504 boyz wobble wobble or something like that...
Yep, Wobble Wobble by 504 boyz indeed.
|
|
|
|
|
RE: Vid of my Kicker Comp CVR12 12"s w/ Alpine MR... - 4/18/2008 9:12:41 AM
|
|
|
t00fatt
Posts: 933
Joined: 11/6/2006
Status: online
|
I wasn't very satisfied with my CVRs in a ported box. Unless your playing real low tones the bass is real sloppy, although mine were 15"s. If you ever want tight clean bass, throw them in a sealed box. You will still hit the lows, and the highs will sound so clean. Then when your done get a single CVX and be blown away.
_____________________________
NORML
2006 I4 Sedan SE
Optima YellowTop
8000k HIDs
Valor ITS-702W
12" Kicker CVX
Kicker ZX750.1
JL Audio VR650-CSi
Kenwood KAC-6202
JL Audio VR690-CXi
Kicker ZX250.2
|
|
|
|
|
RE: Vid of my Kicker Comp CVR12 12"s w/ Alpine MR... - 4/18/2008 9:59:01 AM
|
|
|
ziggy!talon
Posts: 95
Joined: 4/2/2008
Status: offline
|
quote:
ORIGINAL: donpisto
Nice vid. I was surprised to hear the bass notes on my computer speakers when you were walking towards your car. Do you get rattling from your trunk lid? If so I'll give you a minor tip that will make a huge difference. I have an 18" sub in my '01 sedan so it pushes quite a bit of air and the rattling annoyed me. A friend of mine recommended taking out this little piece that is in the trunk lid. It's on the bottom covered by a platic piece and bolted to it. All it is, is a weight for the trunk lid and it rattles the piss out of the lid. I took mine out, filled it with expanding foam, and covered the lid with sound deadener. You don't need to go through all that, just removing the peice will help alot. Here is a picture of where it's located.
pic
thanks for the tip, i'll check that out... i dont get a whole lot of trunk rattle, i get ALOT of licence plate rattle though, even though it's screwed in with 4 screws as TIGHT as i could possibly tighten them, and put some cushy like packing material stuff behind it even...still rattles....
_____________________________
98 EX 5MT H22A-S swap, I/E, DR's in front
Lots of audio stuff
|
|
|
|
|
RE: Vid of my Kicker Comp CVR12 12"s w/ Alpine MR... - 4/18/2008 10:01:47 AM
|
|
|
ziggy!talon
Posts: 95
Joined: 4/2/2008
Status: offline
|
i looked in my trunk and i dont think i have that thing in there...i'll take some pics... i also took the fan off of my amp and put the cover back on, im gonna snap some more shots and post them up here.
_____________________________
98 EX 5MT H22A-S swap, I/E, DR's in front
Lots of audio stuff
|
|
|
|
|
RE: Vid of my Kicker Comp CVR12 12"s w/ Alpine MR... - 4/18/2008 10:04:20 AM
|
|
|
ziggy!talon
Posts: 95
Joined: 4/2/2008
Status: offline
|
quote:
ORIGINAL: t00fatt
I wasn't very satisfied with my CVRs in a ported box. Unless your playing real low tones the bass is real sloppy, although mine were 15"s. If you ever want tight clean bass, throw them in a sealed box. You will still hit the lows, and the highs will sound so clean. Then when your done get a single CVX and be blown away.
mine are 12"s and they arent sloppy at all, in fact they are really tight, in rock songs they sound great, nice and tight....but my box is made exactly the right size for them.
_____________________________
98 EX 5MT H22A-S swap, I/E, DR's in front
Lots of audio stuff
|
|
|
|
|
|
|
|
|
RE: Vid of my Kicker Comp CVR12 12"s w/ Alpine MR... - 4/18/2008 5:28:54 PM
|
|
|
donpisto
Posts: 113
Joined: 4/17/2008
Status: offline
|
Lucky you that you don't have that piece. It's a big headache. If the fan wasn't a problem, I would have kept it in/on the amp, wherever it was. It will help keep the amp cool and run more efficient, which is why it would not go into protect mode before when wired at 1 ohm.
As for the license plate rattling put one layer of sound deadener on the back. You can use Dynamat, but I prefer Second Skin Damplifier (Second Skin being the company). It's thicker than Dynamat Xtreme and cheaper, and IMO better. I've used both and the adhesion on the Second Skin is way better. You will also want to put an open cell foam behind the license plate as well. I'll take pictures tomorrow and show you how I did mine. Rattles will go away. The stuff I use is also by Second Skin and it is called Rattle Pad.
|
|
|
|
Contact Us |
Advertising |
Automotive Links |
Archive |
About Us |
Honda Accord Links |
Legal |
Privacy Policy |
© Honda Accord Forum.com
Honda Accord Forum .com is not affiliated with or endorsed by Honda Motor Company.
|
Printable Version
