possible DIY?
Login | |
|
possible DIY? - 5/8/2008 6:32:44 AM
|
|
|
bikener
Posts: 6
Score: 0 Joined: 5/7/2008 Status: offline
|
So my clutch is starting to slip.. that sucks. I've go very little knowledge about clutch work but my dad sais he could probably do the labour. Would it be possible for two noobs (me and my dad) to replace the clutch in my 1990 accord if we did any required research for the job? How hard is it to replace the clutch?
|
|
|
|
|
|
|
|
RE: possible DIY? - 5/8/2008 11:55:50 AM
|
|
|
00AccordLX5spd
Posts: 3815
Score: 0 Joined: 1/16/2007 Status: offline
|
As BKC said, the entire transmission must be dropped/removed to work on/replace the clutch. The car will need to be lifted off the ground enough to get the trans dropped to allow access to the clutch. Unless you want to remove the engine instead...
_____________________________
2000 Accord LX Sedan F23A1 5spd -Short Shift Adapter -eBay SRI w/ K&N 1995 Accord V6 Sedan AT - AKA "the money pit" 1991 Mustang LX 5.0 Convertible - my daily driver all through college - now sits in my dad''s garage - needs a little TLC
|
|
|
|
RE: possible DIY? - 5/8/2008 12:19:06 PM
|
|
|
falkore24
Posts: 5932
Score: 0 Joined: 8/16/2007 From: Wayne, NJ Status: offline
|
Dropping the tranny is a lot easier than pulling the engine.
_____________________________
2006 Scion TC (ZPI-18G pending) 2000 V6-AT (RIP 3G) Temp Search thanks to Finch13
|
|
|
|
RE: possible DIY? - 5/8/2008 1:29:01 PM
|
|
|
00AccordLX5spd
Posts: 3815
Score: 0 Joined: 1/16/2007 Status: offline
|
quote:
ORIGINAL: falkore24 Dropping the tranny is a lot easier than pulling the engine. Oh really? **sarcasm**
_____________________________
2000 Accord LX Sedan F23A1 5spd -Short Shift Adapter -eBay SRI w/ K&N 1995 Accord V6 Sedan AT - AKA "the money pit" 1991 Mustang LX 5.0 Convertible - my daily driver all through college - now sits in my dad''s garage - needs a little TLC
|
|
|
|
RE: possible DIY? - 5/8/2008 1:57:23 PM
|
|
|
finch13
 Posts: 4278
Score: 0 Joined: 6/7/2007 From: St. Paul, MN Status: offline
|
quote:
ORIGINAL: 00AccordLX5spd quote:
ORIGINAL: falkore24 Dropping the tranny is a lot easier than pulling the engine. Oh really? **sarcasm** I am going to be changing the clutch and flywheel here as soon as I get my exchanged clutch disc back from Fidanza. I can let you know how difficult it was to do. It's not going to be performed on a lift or anything, just jackstands and tools, FTW.
_____________________________
USE ME TO SEARCH HAF PWOTY 2008!
|
|
|
|
RE: possible DIY? - 5/8/2008 2:52:19 PM
|
|
|
00AccordLX5spd
Posts: 3815
Score: 0 Joined: 1/16/2007 Status: offline
|
quote:
ORIGINAL: finch13 I am going to be changing the clutch and flywheel here as soon as I get my exchanged clutch disc back from Fidanza. I can let you know how difficult it was to do. It's not going to be performed on a lift or anything, just jackstands and tools, FTW. DIY with pics!! That would be a nice edition to the DIY section! Do it or ban
_____________________________
2000 Accord LX Sedan F23A1 5spd -Short Shift Adapter -eBay SRI w/ K&N 1995 Accord V6 Sedan AT - AKA "the money pit" 1991 Mustang LX 5.0 Convertible - my daily driver all through college - now sits in my dad''s garage - needs a little TLC
|
|
|
|
RE: possible DIY? - 5/8/2008 2:55:06 PM
|
|
|
finch13
 Posts: 4278
Score: 0 Joined: 6/7/2007 From: St. Paul, MN Status: offline
|
I can try... my Grandpa gets fussy over wasting time though... wouldn't want to support those ricer hooligans! lol. I will see what I can do though.
_____________________________
USE ME TO SEARCH HAF PWOTY 2008!
|
|
|
|
RE: possible DIY? - 5/8/2008 3:10:20 PM
|
|
|
falkore24
Posts: 5932
Score: 0 Joined: 8/16/2007 From: Wayne, NJ Status: offline
|
Don't get the camera greasy!!!
_____________________________
2006 Scion TC (ZPI-18G pending) 2000 V6-AT (RIP 3G) Temp Search thanks to Finch13
|
|
|
|
RE: possible DIY? - 5/8/2008 10:13:15 PM
|
|
|
WheelBrokerAng
 Posts: 7085
Score: 0 Joined: 8/30/2004 From: Canton/Massillon, Ohio 44646 Status: offline
|
But if you do, make sure you use windex cleaner and a Soft Cloth
_____________________________
" Prejudice Saves Time ; It Enables Us To Form Opinions Without Facts "
|
|
|
|
RE: possible DIY? - 5/9/2008 8:42:59 AM
|
|
|
00AccordLX5spd
Posts: 3815
Score: 0 Joined: 1/16/2007 Status: offline
|
quote:
ORIGINAL: finch13 I can try... my Grandpa gets fussy over wasting time though... wouldn't want to support those ricer hooligans! lol. I will see what I can do though. Yeah I don't blame him. I can imagine how much extra time that would throw in if you tried to take pictures of everything. But still.....it would be an awesome addition to the DIY section if you did it!
_____________________________
2000 Accord LX Sedan F23A1 5spd -Short Shift Adapter -eBay SRI w/ K&N 1995 Accord V6 Sedan AT - AKA "the money pit" 1991 Mustang LX 5.0 Convertible - my daily driver all through college - now sits in my dad''s garage - needs a little TLC
|
|
|
|
|