invidia or apexi? (Full Version)

Honda Accord >> Your Ride >> Headers, Intake, & Exhaust

invidia or apexi?

  

drummer8332 -> invidia or apexi? (7/14/2008 9:13:34 PM)

hey guys
ive got a 98 accord ex and i want to get an exhaust for it. i was looking for a nice deep tone and ive come between the delema of the invidia n1 or the apexi ws2.  I hear the apexi hangs pretty low and i havent heard if the invidia does or not.  Which one do you think I should go with?

  
03Sleeper -> RE: invidia or apexi? (7/14/2008 9:52:05 PM)

apexi ws2

i have never heard of the brand invidia....and the product (n1) is actually derived from an apexi application. so im guessin invidia is along the lines of tsudo....eBay cheap.

falkore24 -> RE: invidia or apexi? (7/15/2008 5:58:33 AM)

WS2 is an oval design, so the can is going to sit higher than an EVO.  It''s most likely higher than most round designs, but that N1 might be a small enough can that it sits as high.  I had the WS2 setup.  It has a real nice tone, but it is quiet.  Above 2500 rpms, the Injen CAI was louder (listen to the second video).  I had Tein SS coilovers on the car also.  I could pull into the driveway headfirst no problem, but pulling out headfirst could scrape the pipes on the sidewalk ..... so don''t back in or pull out headfirst.  We have 5 cars in my driveway, so sometimes it was hard or impossible to back out.

Here are some videos:

WS2 in my driveway
0-60 run in the car

  

Page: [1]

Return to Honda Accord Forum home page or view the Full Version of this page.