'92 accord at-rear motor mount

Printable Version

Honda Accord Forum >> General >> Do-It-Yourself Section >> DIY Requests >> '92 accord at-rear motor mount

Page: [1]

Login Message << Older Topic   Newer Topic >>

'92 accord at-rear motor mount - 10/23/2006 10:28:20 PM    trvlnut   Posts: 3 Score: 0 Joined: 11/23/2005 Status: offline I have done a search on how to do this and I'm not having any luck so I decided to post here. My car vibrates when idling. I had one of the front motor mounts replaced and that helped, but it's still vibrating. I'm thinking that the rear motor mount needs to be replaced. My experience working on cars is not much. Biggest thing I've done is replace the alternator. So, does anyone know where I can find info on how to replace the rear motor mount? I want to look at the instructions (with pics if possible) to see if I dare attempt it. TIA < Message edited by trvlnut -- 10/23/2006 10:34:17 PM > Post #: 1

RE: '92 accord at-rear motor mount - 10/30/2006 12:08:51 AM    deserthonda Posts: 3575 Score: 0 Joined: 12/3/2005 Status: offline before you replace it, you got to make sure that it is broken,,,,,,put a floor jack under the tranny and raise car up slightly,, look at the motor mount , if the rubber part of it separates , or you can see it broken then mount needs to be replaced ,, assuming your car has auto tranny, there is a vacc hose that goes to mount diaphram,, at idle 700 rpm car in gear, should have vacc available at that hose ,, if you do, get a vacc pump and apply vacc at diaphram to make sure it is holding vacc and not leaking If you need to replace the mount , i have found the best way is to remove it from under the car, < Message edited by deserthonda -- 10/30/2006 12:09:49 AM > _____________________________ No Year No Model in Your signature No Help from me Take a look in the DIY section before asking for help Always Diagnose First,,, Before Replacing Parts (in reply to trvlnut) Post #: 2

RE: '92 accord at-rear motor mount - 10/30/2006 12:16:08 AM    YeuEmMaiMai Posts: 1822 Score: 0 Joined: 5/28/2006 Status: offline DH is right..... you are going to have to support the engine and tring to get it from the top is a MAJOR PITB (intake and other stuff in the way) I do not believe that you will need to remove the exhasut pipe but if you do, it will make it a little easier... _____________________________ Jesus is Salvation White 2002 Acura CL type S. 68K and change Criminals thrive upon the intolerence of society''s understanding.....and political correctness (in reply to deserthonda) Post #: 3

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Honda Accord Prices

Top 10 Posters
wheelbrokera 7085 sir_nasty 6309 falkore24 5950 finch13 4304 00accordlx5s 3815 deserthonda 3575 live2rice 3454 jimblake 3285 19accord97 3171 smaglik 2623

New Vendors
Sportwing
AMSOIL - Performance Oil Technology