New guy

Printable Version

Honda Accord Forums >> General >> New Member Area >> New guy

Page: [1] 2   next >   >>

Login Message << Older Topic   Newer Topic >>

New guy - 4/6/2007 4:45:02 AM    whitedragon   Posts: 5 Joined: 4/6/2007 Status: offline wats up, names mitch, i got a 92 accord sittin on 17 inch enkeis.  lookin to do a few mods as far as exhaust and body kit any help ?? Post #: 1

RE: New guy - 4/6/2007 8:23:04 AM    onedollaraccord   Posts: 19 Joined: 3/23/2007 Status: offline Welcome to the forum.  _____________________________ 1989 honda accord LXi, 5 speeds (love it!) 1997 Saturn SL1, 5 speeds (drive it) 2005 Chevy Equinox (My wife's) (in reply to whitedragon) Post #: 2

RE: New guy - 4/6/2007 3:06:48 PM    C6Vette_Lingenfelter   Posts: 20 Joined: 4/6/2007 Status: offline Im new too....Couple friends told me about this forum and I thought it might be fun. I have a 2002 Accord, I'm done doing stuff to it since I just got a new corvette and got it back from Lingenfelter. But I do know a lot about Accords. _____________________________ C6 Corvette, Lingenfelter 403 455 RWHP 515 at the Crank. 2002 Honda Accord V-tec Header,AEM Pulley's, Intake, cat-back exhaust, 125 shot of NOS, Intake Manifold (in reply to onedollaraccord) Post #: 3

RE: New guy - 4/6/2007 3:49:20 PM    sir_nasty Posts: 6309 Joined: 2/23/2006 Status: offline what did you do to the accord before you quit?  welcome to the forum both of you! _____________________________ 1981 Civic Station Wagon - ROhnda (Really Old Honda) 1981 Honda CB650 Motorcylce - WHEE What More can I say? 2000 Lexus RX 300 - Oooh baby my wife let me drive it once!! Quote: Life''''s great but it''''s not all beer and skittles (in reply to C6Vette_Lingenfelter) Post #: 4

RE: New guy - 4/6/2007 5:18:32 PM    WheelBrokerAng Posts: 7085 Joined: 8/30/2004 From: Canton/Massillon, Ohio 44646 Status: offline Lot's a Help here in these Forums...Welcome in to the HAF! Do a bit of planning 1st instead of just jumping in and doing things. WheelBrokerAng  _____________________________ " Prejudice Saves Time ; It Enables Us To Form Opinions Without Facts " (in reply to whitedragon) Post #: 5

RE: New guy - 4/6/2007 5:50:46 PM    C6Vette_Lingenfelter   Posts: 20 Joined: 4/6/2007 Status: offline Thanks!, The first thing I did to it when I got it is put some rims on it. Then came the AEM cold air intake (V2), The cat-back, then the headers, and intake manifold. I need to reload on the spray. I figured I wouldn't be using it much in the winter soo never re-filled it. I should probably do that this week sometime..haha I love the car but I'm done putting the money in it....I will save my money for my beast ( C6 ) _____________________________ C6 Corvette, Lingenfelter 403 455 RWHP 515 at the Crank. 2002 Honda Accord V-tec Header,AEM Pulley's, Intake, cat-back exhaust, 125 shot of NOS, Intake Manifold (in reply to WheelBrokerAng) Post #: 6

RE: New guy - 4/6/2007 6:19:58 PM    sir_nasty Posts: 6309 Joined: 2/23/2006 Status: offline What brand's did you go with on the cat-back, headers, and Nitros systems?  Would you suggest them to other people? _____________________________ 1981 Civic Station Wagon - ROhnda (Really Old Honda) 1981 Honda CB650 Motorcylce - WHEE What More can I say? 2000 Lexus RX 300 - Oooh baby my wife let me drive it once!! Quote: Life''''s great but it''''s not all beer and skittles (in reply to C6Vette_Lingenfelter) Post #: 7

RE: New guy - 4/6/2007 7:15:00 PM    Shadow1992 Posts: 332 Joined: 1/10/2007 Status: offline the Greddy EVO2 cat back system fits very well in the 92 accords, sits nicely in the space of the old tip and muffler _____________________________ 1992 Accord EX massively modifed H22A 2.5L stroker kit GT35R turbo @ 24psi 459 whp 404 ft-lbs torque (in reply to sir_nasty) Post #: 8

RE: New guy - 4/6/2007 7:44:09 PM    C6Vette_Lingenfelter   Posts: 20 Joined: 4/6/2007 Status: offline Header- DC Sports Cat-Back- DC Sports Twin-Canaster Nitrous- ZEX Wet Nitrous Kit Anything DC Sports I would highly suggest. Very good stuff! And with the Nitrous, you have to be careful with, and don't use it a lot and be smart with it _____________________________ C6 Corvette, Lingenfelter 403 455 RWHP 515 at the Crank. 2002 Honda Accord V-tec Header,AEM Pulley's, Intake, cat-back exhaust, 125 shot of NOS, Intake Manifold (in reply to Shadow1992) Post #: 9

RE: New guy - 4/7/2007 7:39:42 PM    whitedragon   Posts: 5 Joined: 4/6/2007 Status: offline Any help on wat exhausts sound the best..  i got the 2.2 if that makes a diff (in reply to whitedragon) Post #: 10

RE: New guy - 4/8/2007 1:16:24 AM    C6Vette_Lingenfelter   Posts: 20 Joined: 4/6/2007 Status: offline Well it depends what you want?...... Do you want a deep sound from your exhaust or the loud "bee in a can" sound? I like the deep and not sooo loud personally, but what ever floats your boat I guess? I have the DC Sport Twin Canaster on my Accord....It's very deep and sounds good, not tooo loud but not tooo quiet..... Let us no what you are goin to get when you make your mind up! _____________________________ C6 Corvette, Lingenfelter 403 455 RWHP 515 at the Crank. 2002 Honda Accord V-tec Header,AEM Pulley's, Intake, cat-back exhaust, 125 shot of NOS, Intake Manifold (in reply to whitedragon) Post #: 11

RE: New guy - 4/8/2007 3:13:25 AM    whitedragon   Posts: 5 Joined: 4/6/2007 Status: offline I don't know wat brand and stuff to get.. i like the deep sound. and as far as diameter . u have any suggestions. I'll prolly be putting it on here in the next week or so. thanx for the help (in reply to C6Vette_Lingenfelter) Post #: 12

RE: New guy - 4/8/2007 12:16:56 PM    C6Vette_Lingenfelter   Posts: 20 Joined: 4/6/2007 Status: offline well DC Sport or Apexi are my favorite. I have a 3 inch tip. It isn't too big and it fits the car just how I wanted it. _____________________________ C6 Corvette, Lingenfelter 403 455 RWHP 515 at the Crank. 2002 Honda Accord V-tec Header,AEM Pulley's, Intake, cat-back exhaust, 125 shot of NOS, Intake Manifold (in reply to whitedragon) Post #: 13

RE: New guy - 4/9/2007 12:54:02 AM    whitedragon   Posts: 5 Joined: 4/6/2007 Status: offline Thanx man..i was lookin at the GReddy exhaust but i dunno if i should go just cat back or go with headers.. Does a header really make a diff? (in reply to C6Vette_Lingenfelter) Post #: 14

RE: New guy - 4/9/2007 3:21:39 PM    C6Vette_Lingenfelter   Posts: 20 Joined: 4/6/2007 Status: offline With the header I really couldn't tell a big difference...only in sound...and not a big difference there either _____________________________ C6 Corvette, Lingenfelter 403 455 RWHP 515 at the Crank. 2002 Honda Accord V-tec Header,AEM Pulley's, Intake, cat-back exhaust, 125 shot of NOS, Intake Manifold (in reply to whitedragon) Post #: 15

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Honda Accord Prices

Top 10 Posters
wheelbrokera 7085 sir_nasty 6309 falkore24 5950 finch13 4309 00accordlx5s 3815 deserthonda 3575 live2rice 3459 jimblake 3288 19accord97 3171 smaglik 2623

New Vendors
Sportwing
AMSOIL - Performance Oil Technology