Is this even possible???
 

I am thinking of doing a engine swap on my 95 coupe with a h22a euro r engine...but with that i am wondering if it is possible to do a euro r body conversion on my coupe. any info will help lots thnx

http://www.carfani.com/wp-content/pi...n-pictures.jpg
this car?
unfortunately, that's not even an accord. It's an Ascot.
If you could even source the bodywork, then you could probably find a way to make it fit, but I would say stick with the engine swap.

uhhh...ok no pic loaded...what i am talking about is taking a front nose fenders and hood with radiator from a european 98+ euro r accord
here is a link of what i am talking about

http://http://www.ebay.com/itm/Front...50803613028%26

hmmmm.... wikipedia says that the 98 euro accords are still based on the ascot innova, which in turn is based on a CB chassis not a CD, but I say if you were already willing to drop 800 dollars on a front end, then screw it, go for it. Post a build thread.

now i isee what pic you posted...huh...didnt know it was an ascot...think i might still try to make it fit

I say do it! I'd love to see that happen to a CD chassis.

I know its been done on the 6th gen Accords because their body style is more similar.

It could be done, but it'd all be trial and error on your part. A lot of man hours for sure.

that is fine by me...with a wife and 2 girls any man cave hours wrenching away is alll good with me. i will probably try it out and if it doesnt work then make it work...lol

Keep us informed with pics as you get her going.

I just read the running gear part of that image, I want the suspension from that ascot in my car! Full double-wishbone on front and rear!

Your car already has double wishbone suspension front and rear. Pretty much all 90s Honda's came with it. It wasn't until the early 2000s that Honda started transitioning to MacPherson struts.




I have seen one person successfully swap a CF4 (Accord Type R) front end. And he ended up going widebody on the car as well.

https://www.hondaaccordforum.com/for...ine=1373244868

https://www.hondaaccordforum.com/for...ine=1373262845
well i'll be darned! I guess I didn't pay enough attention under there. Can I correct my negative camber then?

Yes you can. For the rear's get Ingall's camber arms (replaces the upper rear arm with an adjustable one). You'll have to get one for each side.

http://www.summitracing.com/search/p...d-individually

For the front, go with Ingall's or SPC camber kit. Don't get the adjustable ball joint ones.....get these:

Ingalls Front Camber Kit Honda Civic Integra Accord | eBay

just lost my job, but that ^ will happen in the future. bong dang here i was thinking "oh macpherson struts I can't adjust camber on these without adjustable pillowball mounts"