My03Accord |
07-06-2009 10:49 PM |
Its simple, you'll have to find the wires they are tied to. Most likely if they are a complete assembly replacement, they are tied in with the parking light circuit. If you have a digital multimeter test the circuit with that. Once found just cut the lead from their 12(+) source (will show 12+ when the parking lights are on, then 0 when parking lights off) and use a switch inline with other end of the switch tied to an accessory circuit with a fuse (for circuit protection) so you can't accidently leave them on when you turn the car off.
|