SLeepyAccord NEED ADVICE
 

My Honda is a 1994 Accord LX with the F22B2 engine. The car has recently been moved into the garage after years of sitting in the elements, I've done much investigating into what the car needs to get running again. I was told by a local dealership that the car needs a new engine because of 3 of the 4 cylinders having low compression. I do not believe this to be true because of the age of the car and the mileage that it has. The odometer was replaced on the car and I have no clue as to the actual mileage on the chassis. Case and point being that I need advice on if the heads should be ported/polished and re-machined along with the block being cleaned and rebuilt with new sleeves.

**ANY ADVICE IS CRUCIAL**
Pics of the car below, no hate :(
https://cimg9.ibsrv.net/gimg/www.hon...15399f735f.jpg
The car where it sits currently in my garage!
https://cimg1.ibsrv.net/gimg/www.hon...5b2353678e.jpg
Engine bay
https://cimg0.ibsrv.net/gimg/www.hon...95b15dd2ec.jpg
Nasty brakes and wheels, need to be sand blasted and calipers and brake pads/rotors replaced.