Drip Rail Moldings
Hey guys, I need a little help on something. I happened to notice that the drip rail moldings on my 98 LX coupe were not positioned correctly. I either need to slide them into the correct position or remove and re-install in correct position. Has anyone ever done this? I really don't want to destroy the molding and/or the clips. Thanks
|
Got pic's? Just want to be sure we are talking the same thing.
|
I'm at work right now, I'll take some at lunch and post 'em
|
2 Attachment(s)
They are the chrome moldings above the driver's door. Please see the picture below...
|
*bump* Does anyone know how to move or remove and re-install these? Thanks again everyone
|
2 Attachment(s)
A bunch of little plastic clips.....hope you don't break too many.
|
AWESOME, I owe you a beer!! Thanks poorman, I'll attempt this weekend.
|
Any info for a 2000 accord coupe
Somebody broke into my car and jammed a screwdriver in there now it's dented up and I think my door has a small gap |
Being the same "gen", I bet they are the same (98-02 Accord = 6th gen Accord). So go from there....sorry too tired to look it there was a "gen split" on these as far as the bode parts are concerned.
|
All times are GMT -5. The time now is 05:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands