ECU for my accord v6 2001, which uses coil on plug ingnition.
Hi everyone, I got my used accord recently. Everything is OK but when I drive more than 3000rpm, the check engine is on. Check with honda and it turns out to be the knock sensor. This trype of accord does not have knock sensor. After thorough checking, I found that this accord uses JDM ECU 37820 P8D J51 which is for Inspire. I decide to find the right ECU for my car. I found that the NZ accord 37820 P8C Q52 is the right one or 37820 P8C T56 (the original one based on VIN check as my car is made in Thailand).
I am wonderring where I can buy 37820 P8C Q52 from Jakarta (whrere I stay).
Thanks
I am wonderring where I can buy 37820 P8C Q52 from Jakarta (whrere I stay).
Thanks
This is not really an "Internal" engine issue, so I'm going to move it to General Tech where more people will probably see it & help.
Most of us are in USA and at least for myself I'm not real sure what's different on these cars in other parts of the world.
Most of us are in USA and at least for myself I'm not real sure what's different on these cars in other parts of the world.
Thread
Thread Starter
Forum
Replies
Last Post



