Radio swap
My 2014 accord Lx radio came without a backup camera and without the g connection port
I bought a 2016 accord sport stereo which I installed in my car, but I couldn´t locate the back lt (reverse signal) input
I read somewhere that reverse signal input is a "Canbus" signal in LX/Sport models. On the other side, pin 24 is the input signal for reverse gear in head units with touch display models
I was planning to manually activate the rearview camera going into diagnosis mode (on/off button + 1 + 6 + menu button) when needed but it's a little annoying. I wired the cam to the G connection port
Could you please help me to locate the input signal when reversing in a factory-installed backup camera stereo? as it is the non-screen stereo of the accord sport 2014-2016
I appreciate your help bro.

Hey Rich, my names Ryan. New to this forum but learned quickly that you're the guru. If you got the time, I'd love some advice.

Objective: Upgrading 2 front, 2 rear, and 2 tweeters from stock to anything better than stock. Will be happy with aftermarket HU and speakers. Not going to have the car long enough to invest in sub + amp.
Car: 2007 honda accord ex sedan, 315000 km on it
HU: Upgraded to aftermarket unit in 2015

Question:
Front: I'm hoping to replace with speakers that fit snug in the existing stock pocket, without an adapter. I'm not sure if 5.25 or 6.5 for the front is a better choice. If I have no choice but to use an adapter, do you have dimensions/diagram for custom MDF adapter that you used?

Hope this catches you at a good time. Thanks man

My wife's car is a 2012 Honda Civic and experiences battery failures.

Question: After reading the ELD bypass information, I thought that a MCU (microcomtroller) might be a reasonable consideration. I suppose that thought came to mind since I retired from EE several years ago and now develop MCU applications for clients. Should I find the necessary Honda charging schematic information, I would even consider developing a Switched Mode Rectifier to not only control the battery float and charge voltages, but also increase the alternator's efficiency by reducing alternator reactance to also improve the alternator's power factor.
I do ask for your input to help me better understand at point I would add this MCU application in a manner not to impact the Honda's CAN OBD2 data protocol.

Your input will be greatly appreciated,
Percy215

Hello Rich..your doing a great job..we really are glad your the Stereo Guru..
Angelo

You are Now A Super Mod and Audio Forum Monitor..in other words the Supreme Stereo Guru...the link on the bottom of the pages that has mod on it is your portal to get into the working of the forum..Go in and get used to her before you get rolling..

thank You for taking on this position..I know you will do great...Angelo