|
Is this all u need for a turbo
Is this allyou need to make a turbo system
is there anything missing please help.... Ceramic Ball Bearing Turbocharger (T3/T4 Hybrid) Spearco Intercooler System Powder-Coated Intercooler Piping Silicone Hose / T-Bolt Clamps Exhaust Manifold - high carbon cast-steel with ceramic coating Fuel / Timing Controller (electronic fuel / timing management system) Fuel Injectors Wastegate Assembly By Pass / Blow Off Valve Assembly Mandrel-bent ceramic coated Downpipe with closed-loop wastegate discharge Intake System with Air Filter |
RE: Is this all u need for a turbo
dont forget the most important part
engine management |
RE: Is this all u need for a turbo
look for a list of things which i wrote down a few months ago... something like, " f23 turbo " or something similar
|
RE: Is this all u need for a turbo
Aight e-management..
gotcha on that.... I have read alot of your post kevin how u put everything on... im just double checking that is all.... |
RE: Is this all u need for a turbo
Where'd you copy and paste that list from.
|
RE: Is this all u need for a turbo
oil and coolant lines for the turbo
|
RE: Is this all u need for a turbo
I copied and pasted from a page that a member posted up i believe this it
http://www.tasauto.com/Product/Brows...=755&sz=50 The turbo is a lil too too expensive butI just want to know what else might I need besides all this all i posted... they just specialize on hondas so i think its a good page... oil and coolant lines aight check on that.... e-magament oil and coolant lines Ceramic Ball Bearing Turbocharger (T3/T4 Hybrid) Spearco Intercooler System Powder-Coated Intercooler Piping Silicone Hose / T-Bolt Clamps Exhaust Manifold - high carbon cast-steel with ceramic coating Fuel / Timing Controller (electronic fuel / timing management system) Fuel Injectors Wastegate Assembly By Pass / Blow Off Valve Assembly Mandrel-bent ceramic coated Downpipe with closed-loop wastegate discharge Intake System with Air Filter |
RE: Is this all u need for a turbo
Don't buy a kit - especially not from there or at all.
Start searching and reading, you're gonna need it. |
RE: Is this all u need for a turbo
ORIGINAL: pawel oil and coolant lines for the turbo |
RE: Is this all u need for a turbo
Why not buy it from there i wasn't planning to its way too much for my pocket...hahaha
yea i don't plan on buying a kit just make one out of scratch... Yea i been doing that homework reading and searching... But what is the main things im gonna need to know and learn about the turbo. |
RE: Is this all u need for a turbo
If you don't have some idea of what's needed or involved you probably shouldn't be considering making a turbo kit for your car.
|
RE: Is this all u need for a turbo
ORIGINAL: BlkCurrantKord If you don't have some idea of what's needed or involved you probably shouldn't be considering making a turbo kit for your car. i guess but it dont mean im not gonna try to get one... i know wats involve wat most parts of theturbowork... and wen i say i want to get one i talking bout like 1year and a half more... all im trying to do is know more bout the parts for right now ima just beef some things up flywhell clutch find a lds for cheap wont happen cam gear underdrive pully n some other things... thanks for ur help and opinions... |
RE: Is this all u need for a turbo
i think that if u do research and ask questions u might learn a lot... i did my own turbo set up w/ what i learned researching and asking (specially in this site)...
I definetly(spl?) think u should go for it... (in a year or so right?) Though if u don't wanna do ur research, then blk isdefinetlyright... don't do it unless u spend a munch of time reading about the subject... |
RE: Is this all u need for a turbo
Thanks kevin.
i know i gotta read alot....n i am trying too.. i been asking and reading n looking for good prices.. been looking for info thanks for da supports.. |
RE: Is this all u need for a turbo
sure... that's what we're all here, to learn and help others! any questions u can justPM me... good luck!
|
RE: Is this all u need for a turbo
almost forgot... get ready to spend around 2.5K... just take ur time purchasing and reading about everything...
|
RE: Is this all u need for a turbo
So where should i start buying like the first thing to buy...
|
RE: Is this all u need for a turbo
the turbo kit + intercooler kit + manifold....
|
| All times are GMT -5. The time now is 07:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands