Fail Story
 

So, the other day my friend and I were installing some fogs on my car(they work great), and we were going to apply the ground from the lights to the horn(we eventually did). An hour of wiring later, we're ready to place the ground. Unsure why, but my friend wasn't really paying attention and undid a bolt that was to my A/C. Coolant burst out on the inside of the front fender EVERYWHERE. Would have been really hilarious to see two 22 year olds and a 1 year old running like little girls from the car(which we did). Anyhow, after the blast was finished we tightened the bolt back up, made sure everything was fine, and then mounted the ground to the horn. The car is getting coolant put in at a local shop as I type.

Here are pics (sorry for the size).

P.S. I have re-adgusted the passenger side fog to not shine up since photos were taken.

https://lh4.googleusercontent.com/-L...2/IMAG0927.jpg
https://lh4.googleusercontent.com/-r...2/IMAG0925.jpg