my 4th gear pull video...
 

showing what a custum ram air intake, and a H22A swap will do ;)

i baby the car for the most part, i dont like running past 7100-7200rpm..

here's a pull from 80-130, basically through VTEC in 4th :)

http://www.youtube.com/watch?v=I0PIVhwVupU


and here's a 0-60 pull, the vids a little dark, but us Accord owners where what's what is on the guages, again, modestly shifting at 7100rpm, i timed it at 5.5-6 seconds... i got off it at ~70mph which was 7000rpm in second... the drag radials really hooked up good on that run, barly any wheel spin at all, and just a little spinning in the beginning of second..

http://www.youtube.com/watch?v=6GBp_J4T3LQ

RE: my 4th gear pull video...
 

oh and here's a current pic of the coupe, sans the DR's...

http://www.ntin.net/~zanejohnson/car...s/P3311199.JPG

RE: my 4th gear pull video...
 

here's a few more ;)

http://www.ntin.net/~zanejohnson/car...s/P1136550.JPG

http://www.ntin.net/~zanejohnson/car...DASD111341.jpg

http://www.ntin.net/~zanejohnson/car...s/100_1931.JPG

http://www.ntin.net/~zanejohnson/car...s/100_1906.JPG

RE: my 4th gear pull video...
 

Hmmm....not calling you a liar or nothing, but why no motor pics if you have a H22 swap with this custom ram air and i don't even think a H22 would fit in that year Accord with out alot of custom work. Plus why are you taping that of a computer and its not you doing it? Sorry seems fishy to me. All i see is a bone stock accord with a sub in the back

RE: my 4th gear pull video...
 

i'll post some under the hood pics when the weather is better... (it's raining like crazy right now here)

the video is the way it is because i recorded it with my cell phone camera, and i have no way of transferring the vid from my phone to the PC directly, so i recorded the phone playing the vid with my digital camera...its the only way i could get it to the PC

the swap was surprisingly easy, we had to move one tranny bolt (and plug the original) to make it bolt up to the tranny, complete wire harness rewire, prelude ECU, AC compressor bracket from an H23 moter, i feel like im forgetting something, but i think that's about all it was...took us about a week to get it in and running...

here's a pic of my ram air setup though:

http://www.ntin.net/~zanejohnson/car%20pics/scoop2.jpg

http://www.ntin.net/~zanejohnson/car%20pics/scoop1.jpg

RE: my 4th gear pull video...
 

look up the Euro Accord SI-R, it's basically what i've done with my car... they got the H22A4 mated to the same 5mt we got here in the states...

RE: my 4th gear pull video...
 

Man your asking for a hydro locked motor with that set up. Theres no fliter on the end of that so your just letting in all kinds of water and dirt into your motor. You better get a fliter on the end of that pipe some how before your looking for a new motor

RE: my 4th gear pull video...
 

oh there's a filter, further up in the tube, made a filter out of wiremesh, like 3 layers of it, it's fine enough to not let anything through that a K&N filter wouldnt... i wouldnt dare run without a filter..

as for the hydrolock part, that is kind of a concern, i try not to drive the car when it's raining, but with the bumper cover on it does a pretty good job of sheilding the scoop from direct rainfall, i've drove the car in the rain, and then taken the intake tubing apart to see if any water made it up, and it was dry up top, only a little water on the scoop itself, but none made it to the top near the throttle body.

RE: my 4th gear pull video...
 

i made a much better quality video of my car today, just revving in the driveway ,and showing the subwoofers excursion.. as soon as i can find a micro USB cable i'll upload the vid...

RE: my 4th gear pull video...
 

Those are the worst videos I've ever seen. I hope you make some good ones and try again. Also reduce the size of the pictures, there are many free programs that do just that. Awful videos and gargantuan pictures do not a good post make.