Welcome to the Honda Accord Forum - Honda Accord Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
i need to tear apart the top end of my engine to further diagnose and repair a dead cylinder...
so.. the question is.. assuming my head is potentially trashed.. and/or needs rebuilt regardless of what else i find...
what are my options for head swaps.. if i go the route of buying a head.. are there any other Honda/acura engines that have a compatible cylinder head that would give me a performance gain (bigger valves, ports, etc) i thought i heard something about swapping with a head out of an acura CL ?
thanks in advance,
This ad is not displayed to registered members. Register your free account today and become a member on Honda Accord Forum!
2002 Accord LX 4cyl(F23A1) VTEC 5spd.
Naples Gold Metallic, Tan/Ivory cloth interior, mostly stock.
Kicker KS600 6.5's/KS6930 6x9's/RF HX2 Punch 12's
RF BD1000.1 running the Punch's
Nakamichi PA-1004 running the mids/highs.
Pioneer Premier DEH-P860MP head unit
Aftermarket Self Installed Keyless/Alarm system
TYC Projectors with DDM 35W 6000k H1 HID's
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for HondaAccordforum.com content, comments, or advertising. HondaAccordforum.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse HondaAccordforum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.