i was actually thinkin about gettin interior led from there

 

ok, well, I guess I might go with inside interior neon instead of outside. I need a new cell phone anyway. Im getting master brake cylinder replaced tommorrow, if I have any money left over from phone, I guess i'll do some engine dress up or something. thanx for the help

 

Im very happy with my interior set-up, i would recomend any/everyone to get one, here are a few pics of my setup:

[img=http://img106.imagevenue.com/loc764/th_31154_DSC00186_122_764lo.JPG][img=http://img158.imagevenue.com/loc1011/th_31160_DSC00182_122_1011lo.JPG][img=http://img176.imagevenue.com/loc390/th_31171_DSC00174_122_390lo.JPG][img=http://img111.imagevenue.com/loc678/th_31175_DSC00173_122_678lo.JPG]
[img=http://img183.imagevenue.com/loc123/th_31190_DSC00149_122_123lo.JPG]


the first one is of one of the exterior rods that shines through the grille. The second is through the rear windshield so you can see the front and back light. the third and fourth are the interior and exterior rods on either side of the car. And the last is from the driver seat.

here is another set of pics from the instal of the rods:
[img=http://img171.imagevenue.com/loc426/th_31536_DSC00145_122_426lo.JPG][img=http://img145.imagevenue.com/loc1155/th_31543_DSC00144_122_1155lo.JPG][img=http://img175.imagevenue.com/loc360/th_31559_DSC00143_122_360lo.JPG]

the first one here is how i mounted the interior rods using zip ties (i love those things) in the back seat. the second and third is where i mounted the controler module in the glove. The way i set it up is that the box always has power and ive set it up to a toggle switch and i have it fade through the seven colors.

 

how is your interior lights wired up? Did you just tap into the parking lights circut or have a seperate switch somewhere?

 

he tapped it into a continuous power source and hooked it up to a switch

looks nice btw can the passengers in the rear see the tubes? or is it hidden? it looks like it can be easily kicked right there at least its not neon tubes they would be goners

 

[sm=smiley20.gif][sm=smiley20.gif][sm=smiley20.gif]I'm sold.All of your drill bits scare me a lil bit, I was hoping not to have to cut up any interior plastic, but I'll manage.

Thanks for the pics!

 

the rear passangers cannot see the tubes. I very rarely have someone in the backseat, but when i do have someone back there i tell them that if they kick the rod ill F'ing kill them. And yes it is going to a continuous power source, i ran a wire from the engine through the firewall into the center console. I have a box of switches there, ill take pics soon