New to this forum...94 accord wagon
Thread Starter
|
Junior Member
Joined: Dec 2012
Posts: 51
New to this forum...94 accord wagon
hey new to this forum
names Bobby- from Cary, NC.
i have 2010 civic and a 1994 accord wagon
so i just posted a bunch of pics of the car, havnt been on here in a while, if u want all the details of the build, i have a build thread in honda-tech.
just for a quick list of upgrades:
built f22 vtec with 9.1.1 compression bisimoto pistson/rods, arp studs, etc
using a f23 im/tb/plenum....140 amp odyssey alternator...
2 sunroofs
theres a lot more stuff im probably forgetting, but this is all i can think of atm
i started this car out by redoing everything the car drives on. ie suspension, camber arms, control arms, axles etc everytthing is new. u can see all this in the first few pages of my honda-tech build. then i went into the motor because it started having problems.
190hp, 197 tq currently, the cam is holding me back a lot but ill get bisimoto's stage 1.2 cam in the coming months closer to when i turbo.
please note: i still need to install: nrg carbon fiber quick release/nrg steering wheel; redo door panels with new fabric; finish headliner; swap all my seat belts to gray (i converted this cars interior from tan to gray); 5 lug conversion (sbc rpf1's maybe?)
i have components all around, an alpine head unit, mbquart 4 channel amp, jl w6 stealth box with jl amp to run it. the stealthbox is made for a sub outback so i need to do some customizing to make it fit properly but seems it'll fit nice..
its a project :P
i get the wagon back from tint later today. 15% all around, 55% windshield.
heres my build thread on honda-tech
94 Accord Wagon F22B1 Turbo Build
heres my build thread on honda society
94 Accord Wagon F22B1 Turbo Build
.
names Bobby- from Cary, NC.
i have 2010 civic and a 1994 accord wagon
so i just posted a bunch of pics of the car, havnt been on here in a while, if u want all the details of the build, i have a build thread in honda-tech.
just for a quick list of upgrades:
built f22 vtec with 9.1.1 compression bisimoto pistson/rods, arp studs, etc
using a f23 im/tb/plenum....140 amp odyssey alternator...
2 sunroofs
theres a lot more stuff im probably forgetting, but this is all i can think of atm
i started this car out by redoing everything the car drives on. ie suspension, camber arms, control arms, axles etc everytthing is new. u can see all this in the first few pages of my honda-tech build. then i went into the motor because it started having problems.
190hp, 197 tq currently, the cam is holding me back a lot but ill get bisimoto's stage 1.2 cam in the coming months closer to when i turbo.
please note: i still need to install: nrg carbon fiber quick release/nrg steering wheel; redo door panels with new fabric; finish headliner; swap all my seat belts to gray (i converted this cars interior from tan to gray); 5 lug conversion (sbc rpf1's maybe?)
i have components all around, an alpine head unit, mbquart 4 channel amp, jl w6 stealth box with jl amp to run it. the stealthbox is made for a sub outback so i need to do some customizing to make it fit properly but seems it'll fit nice..
its a project :P
i get the wagon back from tint later today. 15% all around, 55% windshield.
heres my build thread on honda-tech
94 Accord Wagon F22B1 Turbo Build
heres my build thread on honda society
94 Accord Wagon F22B1 Turbo Build
.
Last edited by bigbpatel; May 29, 2013 at 08:50 AM.
Thread Starter
|
Junior Member
Joined: Dec 2012
Posts: 51
Last edited by bigbpatel; Dec 5, 2012 at 11:14 AM.
Thread Starter
|
Junior Member
Joined: Dec 2012
Posts: 51
forged pistons rods upgrades wrist pins
new built h22 tranny with lsd
94 Accord Wagon F22B1 Turbo Build
new built h22 tranny with lsd
94 Accord Wagon F22B1 Turbo Build
Last edited by bigbpatel; Dec 5, 2012 at 11:14 AM.
Thread Starter
|
Junior Member
Joined: Dec 2012
Posts: 51
Thread Starter
|
Junior Member
Joined: Dec 2012
Posts: 51
im going to east coast honda meeting in richmond,va in july
Thread Starter
|
Junior Member
Joined: Dec 2012
Posts: 51
Last edited by bigbpatel; May 29, 2013 at 07:09 AM.
Thread Starter
|
Junior Member
Joined: Dec 2012
Posts: 51
.
rear end after i put emblems on. i was gonna use this color changing paint i have but decided on oem silver. 2013 accord emblem, stock rear emblem
once im boosted im gonna add the turbo emblem (same one thats on my rdx) from acura to go on the right side
this is from a car show i went to last week. springfest at VA beach
http://honda-tech.com/showthread.php?t=3096428
rear end after i put emblems on. i was gonna use this color changing paint i have but decided on oem silver. 2013 accord emblem, stock rear emblem
once im boosted im gonna add the turbo emblem (same one thats on my rdx) from acura to go on the right side
this is from a car show i went to last week. springfest at VA beach
http://honda-tech.com/showthread.php?t=3096428
Last edited by bigbpatel; May 29, 2013 at 07:08 AM.
Thread Starter
|
Junior Member
Joined: Dec 2012
Posts: 51
gauge pod thing henry made. cant wait till my head units in. and steering wheel lol
random shots of the whipp...not sure how i feel about the rims but they were 300 brand new and i didnt like the gold...
and theres a lot of stuff in the back of that wagon so it looks lower in the back but its not
http://honda-tech.com/showthread.php?t=3096428
random shots of the whipp...not sure how i feel about the rims but they were 300 brand new and i didnt like the gold...
and theres a lot of stuff in the back of that wagon so it looks lower in the back but its not
http://honda-tech.com/showthread.php?t=3096428
Last edited by bigbpatel; May 29, 2013 at 07:08 AM.