Audio/Visual Electronics Wired up? Everyone's got some sort of electrical modification... let's hear about it here.

03 Accord with 2 12s

Thread Tools
 
Search this Thread
 
Old Sep 13, 2005 | 02:31 PM
  #1  
PilotForLife86
Unregistered
Posts: n/a
Default 03 Accord with 2 12s

Hey everyone, I just installed two 12" subs into my car and my trunk rattles like hell...what should I do about it? Dynamat? or is there something cheaper that actually works....

thanks
 
Old Sep 13, 2005 | 07:12 PM
  #2  
WheelBrokerAng's Avatar
Administrator
Joined: Aug 2004
Posts: 30,424
From: Canton/Massillon, Ohio 44646
Default RE: 03 Accord with 2 12s

You Got The Answer yourself ....DYNAMAT...

Welcome to the forums...

WheelBrokerAng
ORIGINAL: PilotForLife86

Hey everyone, I just installed two 12" subs into my car and my trunk rattles like hell...what should I do about it? Dynamat? or is there something cheaper that actually works....

thanks
 
Old Sep 13, 2005 | 09:22 PM
  #3  
PilotForLife86
Unregistered
Posts: n/a
Default RE: 03 Accord with 2 12s

but, it only rattles behind the license plate...if I press down on the trunk it will stop, if I push on the license plate it will stop a little bit but it sounds like rattling is between the fabric and the metal(inside the trunk lid), so if I put dyna mat on that section it will weigh it down a bit and keep the sound towards the front of the car right?
 
Old Sep 15, 2005 | 12:31 AM
  #4  
theycallmerickjames's Avatar
Joined: May 2005
Posts: 163
From:
Default RE: 03 Accord with 2 12s

i've got an 05 accord and i had the same problem. you need to take out the WHOLE licence plate assembly and put dynamat in between the assembly and the trunk.... and some behind the license plate
 
Old Sep 15, 2005 | 07:47 PM
  #5  
PilotForLife86
Unregistered
Posts: n/a
Default RE: 03 Accord with 2 12s

how is that possible...I know you take out those plastic screws in the fabric on the trunk lid...then what?
 
Old Sep 18, 2005 | 07:44 PM
  #6  
theycallmerickjames's Avatar
Joined: May 2005
Posts: 163
From:
Default RE: 03 Accord with 2 12s

there are two bolts... loosen and remove the nuts to them in your trunk lid...... it's a biatch to get this off, so be carefull
 
Old Sep 18, 2005 | 11:13 PM
  #7  
PilotForLife86
Unregistered
Posts: n/a
Default RE: 03 Accord with 2 12s

but isn't the holder welded to the trunk
 
Old Sep 26, 2005 | 11:16 AM
  #8  
accorddriverc's Avatar
Member
Joined: May 2005
Posts: 218
From: Bronx
Default RE: 03 Accord with 2 12s

my plate rattles too. I need to fix that
 
Old Sep 28, 2005 | 01:29 AM
  #9  
theycallmerickjames's Avatar
Joined: May 2005
Posts: 163
From:
Default RE: 03 Accord with 2 12s

umm, no the "holder" is not welded to the trunk... like i said.... BOLTED
 
Old Oct 10, 2005 | 02:56 PM
  #10  
remington870_20ga's Avatar
Senior Member
Joined: Mar 2005
Posts: 365
Default RE: 03 Accord with 2 12s

Dynamat is good. You can also look for a little less thick generic stuff at your local hardware store.
 



All times are GMT -5. The time now is 07:41 AM.