rwd 383 stroker 5th gen
Thread Starter
Joined: Dec 2007
Posts: 3
From: victoria, bc
rwd 383 stroker 5th gen
not sure if this is the right place to be posting this but im kinda dieing to tell some peeps about this.
after 2 years of planning and preparing im turning my 5th gen coupe into a rwd pro comp monster. tubing out the unibody, fully independant rear end. 350 bored to a 383 stroker 12 to 1 compression, 6 point roll cage. new motor should put out roughly 560 whp.
im just excited that the dream is coming a reality. btw im in victoria bc canada.
after 2 years of planning and preparing im turning my 5th gen coupe into a rwd pro comp monster. tubing out the unibody, fully independant rear end. 350 bored to a 383 stroker 12 to 1 compression, 6 point roll cage. new motor should put out roughly 560 whp.
im just excited that the dream is coming a reality. btw im in victoria bc canada.
Senior Member
Joined: Aug 2010
Posts: 525
From: MA
not sure if this is the right place to be posting this but im kinda dieing to tell some peeps about this.
after 2 years of planning and preparing im turning my 5th gen coupe into a rwd pro comp monster. tubing out the unibody, fully independant rear end. 350 bored to a 383 stroker 12 to 1 compression, 6 point roll cage. new motor should put out roughly 560 whp.
im just excited that the dream is coming a reality. btw im in victoria bc canada.
after 2 years of planning and preparing im turning my 5th gen coupe into a rwd pro comp monster. tubing out the unibody, fully independant rear end. 350 bored to a 383 stroker 12 to 1 compression, 6 point roll cage. new motor should put out roughly 560 whp.
im just excited that the dream is coming a reality. btw im in victoria bc canada.
Thread
Thread Starter
Forum
Replies
Last Post
