swap question please read
#1
Unregistered
Posts: n/a
swap question please read
Ok guys here goes nothing. I had a friend pass away as a passenger in an accident. He owned an accord i had helped him with. When he passsed away he had blown his motor 2 weeks earlier. I had told him i would replace his hydrolocked motor. While in possesion of the car he had his accident. I fixed the car and took it to his birthday/memorial about a month later. His family didnt know what to think and aperantly there son had talked about me alot more then i could have imagined. They knew me without every realy meating me for a very long period of time. They decided to give me the car after everything was said and done. They said there son would have wanted it that way. I drove the car until i broke a camshaft on the highway by blocking an oil passage with sludge. (insert castrol commercial here) I have had the car parked for months now and its time to fix it. His dream was to put a vtec motor in, i want to do this for him and finnaly let the car go to someone else. I will have gone as far as i can. I no longer can keep the car around. Thanx in advance.
I want to do a motor swap with vtec. right now its an f22a non vtec S.O.H.C. i was thinking about putting in a jdm f23a or f22a. The car is a 92 accord five speed. i just want to buy a vtec motor that will bolt up to the cars existing parts. with as little cost as possible.
please help me out i have NO knowledge of this swap.i need to know how to run the vtec to selonoid if i can buy a mount kit or what parts ill need.
[>:]
I want to do a motor swap with vtec. right now its an f22a non vtec S.O.H.C. i was thinking about putting in a jdm f23a or f22a. The car is a 92 accord five speed. i just want to buy a vtec motor that will bolt up to the cars existing parts. with as little cost as possible.
please help me out i have NO knowledge of this swap.i need to know how to run the vtec to selonoid if i can buy a mount kit or what parts ill need.
[>:]
#5
RE: swap question please read
or you could do what I did
buy a new car with 260hp and add headers and intake for 30HP (headers) and 17hp (Intake). That tach needle hits 7100 before you can blink
yeah, it hauls butt
buy a new car with 260hp and add headers and intake for 30HP (headers) and 17hp (Intake). That tach needle hits 7100 before you can blink
yeah, it hauls butt
#6
RE: swap question please read
sorry to hear about your friend man.... I'd say the same as these guys go for an H22 swap, I believe f22parts.com has most of the stuff you'll need to pull it off and there is MASSIVE support online for it/how to do it since it's one of the more common swaps.
#8
Unregistered
Posts: n/a
RE: swap question please read
What about an F20B? Why doesnt that get any love? You can find them for $2500-3000, with five speed trans and LSD. Hmmm. How hard of a swap would that be, and whats the aftermarket like for that engine?
http://www.jazzproparts.com/ProductD...oductCode=F20B
http://www.jazzproparts.com/ProductD...oductCode=F20B
#9
RE: swap question please read
Nice post poser_pilot6, you have peaked my curiousity about this engine. According to the spec sheet from the site you posted it makes 215 hp and it is cheaper than a similar set up H22. I hope somone will fill us in on any catches/issues etc.