is it ok to turbo a f22a or a h22a without sleeving the motor? i was wanting to turbo a h22 if i did a swap or just turbo my f22 if it would hold together with low boost around 9p or 10pof boost.

 

8 pounds max on stock internals for the F22.

 

thinking of putting a prelude SI R motor in my 92 what would the most boost be on that. i'm looking for a little power and that sweet sound

 

Probably 8, maaaaybe 10. Prelude SiR has either an H22 or H23, both will fit fine. KevinAccord turboed his 6th gen auto at 7 psi, I don't know is that low of a pressure will give you a very loud "pshh" sound from the BOV.

 

https://www.hondaaccordforum.com/m_123968/tm.htm

 

of couse it will!

 

Lol...what kind of BOV do you have Kevin?

 

with aftermarket, forged internals you can run an F22 safely at high boost without sleeving it.
an H22 is a different story, they have a type of composite sleeve, and I wouldnt recommend going over 9PSI on the sleeves, although turbocharging a stock H22 is a terrible idea anyway.

 

Turbonetics type... (bought original one but came wrong... so I had to finish my car soon andgot that one from a friend...free) sounds ugly... secuential... Im looking to change it...