90 Accord CV
#2
It's a right-hand thread.
There's a straight (non-threaded) collar on the outboard side of the nut, which is supposed to be staked down into a groove in the axle. Use a nail or something to pry that up & out of the groove; that should help out. Still, it's not real easy.
There's a straight (non-threaded) collar on the outboard side of the nut, which is supposed to be staked down into a groove in the axle. Use a nail or something to pry that up & out of the groove; that should help out. Still, it's not real easy.