General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Cam position sensor

Thread Tools
 
Search this Thread
 
  #31  
Old 06-28-2011, 06:20 AM
07AccordCp's Avatar
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 53
Default

I tried disconnecting and reconnecting the battery, didn't work. I checked my work several times already. The only thing I haven't tried was reinstalling the old sensor. The car isnt under warranty.
 

Last edited by 07AccordCp; 06-28-2011 at 06:30 AM.
  #32  
Old 06-28-2011, 04:02 PM
07AccordCp's Avatar
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 53
Default

So I just finished reinstalling the old cps. Still wont start, no cel bulb check, and no battery bulb check.
 
  #33  
Old 06-28-2011, 04:30 PM
PAhonda's Avatar
Super Moderator
Join Date: Sep 2006
Location: Houston, TX
Posts: 15,674
Default

Reinstall the new sensor, since you verified that this is not a problem with the sensor.

I don't have any great ideas on what you should do next. Does your car have an automatic or manual transmission?

If you have access to a code reader, you may be able to clear the original code. I hate giving this advice, but you may need to call the dealership for service. Their HDS may have to reset the PCM. It can't hurt to call their service dept.
 
  #34  
Old 06-28-2011, 08:36 PM
07AccordCp's Avatar
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 53
Default

It's a manual trans.
 
  #35  
Old 06-28-2011, 08:51 PM
PAhonda's Avatar
Super Moderator
Join Date: Sep 2006
Location: Houston, TX
Posts: 15,674
Default

When you turn the key to the II position and do not try to start the car, do you hear the fuel pump prime for about two seconds? If so, you might want try popping the clutch to start the car.
 
  #36  
Old 06-29-2011, 08:29 AM
07AccordCp's Avatar
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 53
Default

You know I'm not sure if I hear it prime. Let's say the fuel pump went bad or the Fuel pump relay went bad. Would the cel/battery lights not show because of this? I know it would prevent the car to start.
 
  #37  
Old 06-29-2011, 11:22 AM
redbull-1's Avatar
Super Moderator
Join Date: Oct 2010
Location: United States
Posts: 7,087
Default

The CEL not lighting up usually means no power to the ECM or ECM not functioning.
 

Last edited by redbull-1; 06-29-2011 at 11:32 AM.
  #38  
Old 06-29-2011, 12:17 PM
07AccordCp's Avatar
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 53
Default

Does the ECM have a fuse attached to it? If so I'll pull it out and take a look.
 
  #39  
Old 06-29-2011, 12:22 PM
redbull-1's Avatar
Super Moderator
Join Date: Oct 2010
Location: United States
Posts: 7,087
Default

The ECM/ECU fuse was shown in post #14.
 
  #40  
Old 06-29-2011, 12:24 PM
redbull-1's Avatar
Super Moderator
Join Date: Oct 2010
Location: United States
Posts: 7,087
Default

I also would recheck closely the battery fuse and main fuse which I posted early in this thread. You never know.
 


Quick Reply: Cam position sensor



All times are GMT -5. The time now is 05:49 AM.