Ok so I am nearing completion of my auto to manual swap in my 1992 lx. The problem I have ran into is that the main plugs at the passenger and drivers side inner fenders are vastly different between my 1992 body and my 1990 engine and transmission. I am wondering if I should swap the engine and trans harness from the old motor and auto trans to the new to me motor and manual trans or if I should swap out the harness from the 1990 body to the 1992 body. some one please help I have spent a ton of time to get this far and this is stumping me

 

Also I have completed most of my partial wire tuck already so removal of the body harness on the 1992 will be extremely difficult

 

I've moved this to General Tech. Please read the posting rules.