Honda Accord 2011 EX: Cylinder misfires
After running on the road for around 20-30 minutes my Honda Accords 2011 EX 4 CYLINDERS cylinders misfire, specifically cylinders 2 and 3 misfire when going 50-60 mph and 1500-2000 RPMs.
After reaching a stop and trying to accelerate vehicle begins to misfire as soon as I attempt to accelerate. This does not occur exactly every time, however it occurs at least 90% of the time.
There is no check engine light as no sensors seem to detect anything. When I take the vehicle to the repair shop, they have a hard time replicating since it takes 20-30 minutes of driving to replicate.
What seems to make the problem better or worse? Its worse after driving 20-30 minutes on a road-going 1500-2000 rpm
I have about a year with this problem
Any help would be appreciated. Thanks
After reaching a stop and trying to accelerate vehicle begins to misfire as soon as I attempt to accelerate. This does not occur exactly every time, however it occurs at least 90% of the time.
There is no check engine light as no sensors seem to detect anything. When I take the vehicle to the repair shop, they have a hard time replicating since it takes 20-30 minutes of driving to replicate.
What seems to make the problem better or worse? Its worse after driving 20-30 minutes on a road-going 1500-2000 rpm
I have about a year with this problem
Any help would be appreciated. Thanks
Last edited by Nelson Rodriguez; Jun 14, 2020 at 02:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
WheelBrokerAng
Sights n Sounds
2
Jun 29, 2011 11:07 AM




