General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

MEMBERS PLEASE READ BEFORE POSTING

Thread Tools
 
Search this Thread
 
  #1  
Old 05-18-2006, 05:51 AM
deserthonda's Avatar
Been Around A Long Time Member
Thread Starter
Join Date: Dec 2005
Location: In The Desert ( Sahara ? )
Posts: 4,754
Default MEMBERS PLEASE READ BEFORE POSTING

It would be a great help and i am sure the members would appreciate it, if when , any members here, that seek help, and found a fix to their problem , to be kind enough .,,to post the fix .

It would make helping the next member a lot easier and faster , if anyone were to have a similar issue

Also , when seeking help and the CEL ( check engine lite ) is on,, or the D4 lite , or ABS lite ...you need to read the code and post it , before you can even ask what the problem might be,,bacause the first reply that you will get is ...

what's the code,,??? Go to Autozone and have them read the code ...

Also...when posting a question for help.

.ALWAYS include the year and model, ( input it on your signature ) and any work that you have done to the car to try to solve the problem ..

And on a final note......take a look at our DIY section the answers you seek might already be there .

Doing this will make the job easier for all of us who are trying to help you and you will get a more accurate , faster reply .

Thank-you

Gianni...
 
  #2  
Old 05-18-2006, 05:15 PM
sir_nasty's Avatar
Senior Member
Join Date: Feb 2006
Location: Montana
Posts: 6,290
Default RE: MEMBERS PLEASE READ

Good call on all of those. If any member seeking help simply follows those directions I'm sure we could get them solutions to 90% of the problems within a very short period of time...
 
  #3  
Old 05-28-2006, 02:24 AM
WheelBrokerAng's Avatar
Administrator
Join Date: Aug 2004
Location: Canton/Massillon, Ohio 44646
Posts: 30,428
Default Re:** members please read before posting

Hi All Members and Persons to be New Members..
Please read this message before you decide to post anything in here..and This means all of us..
You Really Need to Read this post if you wish to have your Questions answered by any of us forum Mods or Members of knowledge...

*** If You Can't Put In The YEAR-Model Of Honda-Engine Size-Transmission Style-How Many Doors You Have-and What Issue You Have With Your Ride , then we just may not answer your Questions..We folks who are trying to Help You out with your problems need this information...For us to Keep having to Ask you all the same Questions Over and Over again does get very REDUNDANT and it makes the answers come back to you slower...SO PLEASE
COMPLY WITH THE CORRECT INFORMATION BEFORE YOU POST.
If you dont read this 1st we will have to send you to this Sticky up here before we let the post get answered...Thank You For Complying

WheelBrokerAng

ORIGINAL: deserthonda

It would be a great help and i am sure the members would appreciate it, if when , any members here, that seek help, and found a fix to their problem , to be kind enough .,,to post the fix .

It would make helping the next member a lot easier and faster , if anyone were to have a similar issue

Also , when seeking help and the CEL ( check engine lite ) is on,, or the D4 lite , or ABS lite ...you need to read the code and post it , before you can even ask what the problem might be,,bacause the first reply that you will get is ...

what's the code,,??? Go to Autozone and have them read the code ...

And 1 final thing...when posting a question for help.

.ALWAYS include the year and model, and any work that you have done to the car to try to solve the problem ..

Doing this will make the job easier for all of us who are trying to help you and you will get a more accurate , faster reply .

Thank-you

Gianni...
 
  #4  
Old 02-05-2007, 08:02 PM
hondadude's Avatar
Super Moderator
Join Date: Aug 2006
Location: Fayetteville, AR
Posts: 2,170
Default Re: Members please read before posting

The only thing I would ask is that people PLEASE stop threadjacking.
It causes great confusion for the original poster trying to solve a problem, as well as the people trying to help resolve problems.
Starting your very own thread is free, easy, and much appreciated.
 

Last edited by hondadude; 04-30-2010 at 10:17 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
g22cd5
General Tech Help
0
12-11-2010 06:02 PM
PAhonda
General Tech Help
0
11-05-2010 07:52 PM
deserthonda
General Tech Help
5
10-04-2010 04:04 PM
WheelBrokerAng
PRIVATE For Sale / Trade Classifieds
9
07-10-2008 12:31 AM
Patrick
Do-It-Yourself Section
0
05-09-2006 11:05 AM



Quick Reply: MEMBERS PLEASE READ BEFORE POSTING



All times are GMT -5. The time now is 04:56 AM.