Honda Accord Forum - Honda Accord Enthusiast Forums

General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

p1253

Thread Tools
 
Search this Thread
 
Old May 5, 2010 | 08:51 PM
Share
  #1  
haddad joe's Avatar
Thread Starter
|
Newest Of Newbies
Joined: Apr 2010
Posts: 20
Default p1253
my engine light is on and with the code reader, p1253 came on . so what i have to look for first. ???? its honda accord 1996 ex 2.3 vtec manual
 
Last edited by haddad joe; May 5, 2010 at 08:54 PM.
Reply
Old May 5, 2010 | 08:54 PM
Share
  #2  
PAhonda's Avatar
Super Moderator
Joined: Sep 2006
Posts: 16,331
From: Houston, TX
Default
A problem with the vtec system.
 
Reply
Old May 5, 2010 | 08:57 PM
Share
  #3  
haddad joe's Avatar
Thread Starter
|
Newest Of Newbies
Joined: Apr 2010
Posts: 20
Default
with the ecu hookup or the the vtec solonoid or oil pressure switch
 
Reply
Old May 5, 2010 | 09:05 PM
Share
  #4  
haddad joe's Avatar
Thread Starter
|
Newest Of Newbies
Joined: Apr 2010
Posts: 20
Default
from ecu i pinout a8 for vtec solonoid and c15 oil pressure switch
 
Reply
Old May 5, 2010 | 09:24 PM
Share
  #5  
PAhonda's Avatar
Super Moderator
Joined: Sep 2006
Posts: 16,331
From: Houston, TX
Default
I was just reading your other post. I found that A8 is for the solenoid and has a grn/yel wire.

Can't find where the pressure switch comes in at. I'll post on your other thread.
 
Reply
Old May 5, 2010 | 09:33 PM
Share
  #6  
haddad joe's Avatar
Thread Starter
|
Newest Of Newbies
Joined: Apr 2010
Posts: 20
Default
ok im runing the2 wire for solonoid and oil pressure outside the harness
 
Reply
Tags
Back to Subforum
General Tech Help
View Next Unread
Chipped ecu help?




Advanced Search

All times are GMT -5. The time now is 07:43 AM.