I need some serious help.
I have to change out my power steering rack in my 1995 Honda accord 2.2L.

I have everything disconnected. All bolds are out.
Literally, the only thing holding this thing in is the high and low pressure lines.

What is the trick to getting to these lines so that I can unscrew them from the old rack?

Then I guess the next question would be, I also need to be able to get them back on when I put the new rack in.

 

I got the steering column disconnected as well. I was able to do that from under the dash behind the gas and break peddles.

So the only thing that I can't loosen are the high and low pressure hoses.

Please Help.

 

Can't really remember.....I get confused from my 3rd and 5th gen's. If the "dust" cover is off and you can't get there with a line wrench, there are crows foot line wrenches that should do this. Again, I've done this once on the 5th and ~three time on my 3rd gens so I can't rememer which is which...