Originally Posted by redbull-1 (Post 325351)

To remove those molding pieces, the door panels need to be removed. For the front doors, the power mirrors will also need to be removed.

After the door panel is removed, there are two screws that need to be removed from each end of the molding. Then from inside the door, slide the molding to the left to release the clips on the molding off the door, then lift up the molding.

Originally Posted by redbull-1 (Post 325354)

These are my pics. from another forum.

http://honda-tech.com/attachment.php...1&d=1237685831

http://honda-tech.com/attachment.php...1&d=1237685843

Originally Posted by redbull-1 (Post 325313)

I am still trying to understand why the outer molding needs replacement if the tint film is on the inside of the window. :confused:

Molding part #1 or 5 online dealer price is $18.29 each. It is not difficult to replace; but, you need to remove the door panel.

Only if you're replacing molding part #2 or 6. which is $22.01 each online (probably not what you're referring to) is really time consuming to replace due to trying to clean off all the double sided tape adhesive residue. No need to remove door panel. Side mirror has to be removed though. -- I have replaced that before.

https://www.hondaaccordforum.com/for...ine=1372302610