![]() |
help installing headers
i just purchased some headers and need some step by step insructions on how to install them i have a 96 accord ex sedan i appreciate any help thanks.
|
Open the hook & count how many spark plugs you have.
Still, installing headers is pretty much just unbolting the stock exhaust manifold & bolting on the header. |
its 4cyl so 4 spark plugs
|
That means you only bought a "header"... If you bought headers then either you bought them for the wrong application, or somone really put it too you... But like jim blake said, its veryveryvery basic, unbolt the old one, bolt on new one, that simple... Unless you bought one of those cheap ebay headers, then its unbolt old one, bolt on new one, take off new one and fix leaks caused by install, bolt on new one, wait three months, take off new one, fix leaks again, chunk in trash, spend your hard earned money on a quality header and you should be good...
|
i bought megan headers ive been doing sone research they seem good some people even say they are better than dc headers
|
Originally Posted by dre707
(Post 211408)
i bought megan headers ive been doing sone research they seem good some people even say they are better than dc headers
|
DC is much better than megan...megan is = to ebay crap. CHeck your welds be4 and after install.
BTW headerS are 2 sets of a header...with 4clys you only have a single HEADER not headerS. |
ill have to disagree with megan being crap. i have owned one of their headers for two years now. it was actually on the car when i bought it and the previous owner had it on there for a year or two as well. the welds actually arent too bad and they are fairly durable. two welds on mine are cracked a little but only because i bottomed out and smashed it :(. i have a new one waiting for the replacement when my new suspension is all done. they arent in anyway the greatest but they work for me. if you want real gains talk to bisimoto.
|
Originally Posted by clutch811
(Post 211583)
ill have to disagree with megan being crap. i have owned one of their headers for two years now. it was actually on the car when i bought it and the previous owner had it on there for a year or two as well. the welds actually arent too bad and they are fairly durable. two welds on mine are cracked a little but only because i bottomed out and smashed it :(. i have a new one waiting for the replacement when my new suspension is all done. they arent in anyway the greatest but they work for me. if you want real gains talk to bisimoto.
Yes if you want gains bisi is the way to go...26hp gain on a stock f22a1 UNTUNED. |
ok guys where can i get that header and how much for 96 accord ex 4cyk auto
|
| All times are GMT -5. The time now is 10:17 AM. |
© 2026 MH Sub I, LLC dba Internet Brands