Help
#3
RE: Help
ORIGINAL: sir_nasty
there is a little slot to the left of the light/odometer, just put the key in there and it should reset (you may have to hold it down for a few seconds)
there is a little slot to the left of the light/odometer, just put the key in there and it should reset (you may have to hold it down for a few seconds)
Turn off the car. Press & hold the odometer reset button while you turn on the key (no need to actually start the engine). Continue holding that button for maybe 20 seconds more. Maint. lamp will flash& then turn off. Done for another 7500 miles.
#5
RE: Help
I didn't get on-line much during the holidays.
Busy with my daughter's car. One tie-rod end balljoint separated on her... In Belden Village parking lot. (I hope she knows how lucky she wasn't driving...) Then I changed her timing belt too.
Busy with my daughter's car. One tie-rod end balljoint separated on her... In Belden Village parking lot. (I hope she knows how lucky she wasn't driving...) Then I changed her timing belt too.
#6
RE: Help
Thats wild as H--L Jim, mine broke out in the parking lot at Portage and Frank ave over by the Speedy Gas . I was coming back from the airport after taking my wife to Akron Canton when Bamm it fell right out..had to tow it to the shop..
Funny story..happend to you and happend to me in BeldinVillage shopping area..
By the way, do you have a brother named John Blake also?
WheelBrokerAng [sm=americanasmiley.gif]
Funny story..happend to you and happend to me in BeldinVillage shopping area..
By the way, do you have a brother named John Blake also?
WheelBrokerAng [sm=americanasmiley.gif]
#7
RE: Help
ORIGINAL: WheelBrokerAng
By the way, do you have a brother named John Blake also?
By the way, do you have a brother named John Blake also?
There's lots of Blake listings in the Canton phone book, I'm not related to any of them!
ps...
Yours came apart in a parking lot too? Lucky.
The towtruck driver told my daughter herecently towed someone who's tie rod came apart while they were driving on the highway. That couldhave had areally bad ending...
Thread
Thread Starter
Forum
Replies
Last Post
brandon0409
General Tech Help
11
02-15-2014 06:36 PM
Levibyz
Engine & Internal
5
05-31-2011 09:43 PM