god have mercy on my soul
god have mercy on my soul
Well, ive found a down pipe which may work just getting some info on a maybe on that, but yeah......
ordered the fuel pump, map bypass, all the bolts, gaskets.
needed
12:1 fmu anyone selling? ^_^
turbo oil lines
oil cooler and relocation kit
we will see.......
ordered the fuel pump, map bypass, all the bolts, gaskets.
needed
12:1 fmu anyone selling? ^_^
turbo oil lines
oil cooler and relocation kit
we will see.......
Senior Member
Joined: Dec 2005
Posts: 775
From: Florida
RE: god have mercy on my soul
haha, take lots of pictures of the install for us! You'll have a turbo accord sooner than you think. And OBX rocks by the way. I installed thier fuel rail and I noticed a good difference (well for a fuel rail). I'm going to get that OBX LSD as soon as I need a new clutch.
RE: god have mercy on my soul
yeah, seeing as you will have the tranny off you might as well put a LSD in. You should take pictures of the whole process of removing the transmission, flywheel and what not, add that to the diy list for everyone.
As for OBX i cant claim either way, havent used any of their products and the only thing ive seen is an obx muffler on a 200sx.
When im taking pictures Ill be sure to not have too many of me going..... oh man..... i screwed this up sooo bad.... lol
As for OBX i cant claim either way, havent used any of their products and the only thing ive seen is an obx muffler on a 200sx.
When im taking pictures Ill be sure to not have too many of me going..... oh man..... i screwed this up sooo bad.... lol
Senior Member
Joined: Dec 2005
Posts: 775
From: Florida
RE: god have mercy on my soul
when I have the trans off, I'll definetly take some pictures of the whole thing. That would be a lot of help to people I'm sure. Plus pictures of splitting the transmission open (for the lsd). Fun stuff!
Well countdown the days to your turbo install marbro, it's coming down to it!
Well countdown the days to your turbo install marbro, it's coming down to it!
RE: god have mercy on my soul
Just need the downpipe now probably buy that next week
bougth a blox 12:1 fmu decided im really not going to find a below 100 with shipping deal
bought the turbo feed and drain lines
and bought the oil cooler and relocation kit the one on ebay, when you do the math it works out to be a lot cheaper and the block plate and oil filter plates for the full kit there are niiice so i figure you couldnt get those by themselves any cheaper then 120 bucks
bougth a blox 12:1 fmu decided im really not going to find a below 100 with shipping deal
bought the turbo feed and drain lines
and bought the oil cooler and relocation kit the one on ebay, when you do the math it works out to be a lot cheaper and the block plate and oil filter plates for the full kit there are niiice so i figure you couldnt get those by themselves any cheaper then 120 bucks
Thread
Thread Starter
Forum
Replies
Last Post
