F.S. 2000 Accord with Fully Built JDM H22a
Thread Starter
|
Newest Of Newbies
Joined: Jul 2011
Posts: 14
From: Villa Rica, GA 30180 this was where I ment :)
F.S. 2000 Accord with Fully Built JDM H22a
I'm deciding to sell my car due to a new baby on the way. Unfortunately the project has to go. This is a 2000 Accord coupe that has a JDM H22a engine thats has a built bottom end and headwork all ready for turbo, with a p28 tuned by speed innovations on the dyno. Has always been the oil changed with synthetic. Transmission has redline synthetic as well. Heres the specs: $6,000
Crower billet Rods
Wiseco 8.5:1 pistons coated
Darton Sleeves
JDM H22a LSD Tranny
Crank balanced to 8500 rpm
Head is ported and polished for turbo
New Ferrea valve springs, retainers, stems, and seals
Skunk2 intake manifold
ARP Head Bolts
ARP main cap bolts
Skunk2 Throttle body
STR Cam gears
Short Ram Intake
p28ecu chipped and tuned for h22a with AEM 02 Gauge
Autometer Boost Gauge
Apexi V-afc2
ACT Clutch
Chassis:
Ground Control Coilovers
KYB front shocks, Tokico rear shocks
19x8 ADR rims
Brembo Driled/Slotted
Stainless Steel Brake Lines
Ingalls front and rear camber kit
Red/Black Leather interior
Momo Steering wheel along with quick release
JDM Black Headlights with 8k HID Headlights
Momo Shift ****/boot combo
Misc:
Because I thought I was going to turbo it, I bought a flowmaster 3 inch full catback made that will be sold with the car
For more photos click here:
Accord pictures by accordy2g - Photobucket
Crower billet Rods
Wiseco 8.5:1 pistons coated
Darton Sleeves
JDM H22a LSD Tranny
Crank balanced to 8500 rpm
Head is ported and polished for turbo
New Ferrea valve springs, retainers, stems, and seals
Skunk2 intake manifold
ARP Head Bolts
ARP main cap bolts
Skunk2 Throttle body
STR Cam gears
Short Ram Intake
p28ecu chipped and tuned for h22a with AEM 02 Gauge
Autometer Boost Gauge
Apexi V-afc2
ACT Clutch
Chassis:
Ground Control Coilovers
KYB front shocks, Tokico rear shocks
19x8 ADR rims
Brembo Driled/Slotted
Stainless Steel Brake Lines
Ingalls front and rear camber kit
Red/Black Leather interior
Momo Steering wheel along with quick release
JDM Black Headlights with 8k HID Headlights
Momo Shift ****/boot combo
Misc:
Because I thought I was going to turbo it, I bought a flowmaster 3 inch full catback made that will be sold with the car
For more photos click here:
Accord pictures by accordy2g - Photobucket
Hi Member
It makes me depressed and sick to my stomach that you have to sale that car..
If I had the money that's what I would do with my cd5.
Fully built h22
Good luck with the sale and congrats on the baby.
To piggy, I would think it's actually making less power with the low compression pistons. Like he said all it needs is a turbo bolted up
If I had the money that's what I would do with my cd5.
Fully built h22
Good luck with the sale and congrats on the baby.
To piggy, I would think it's actually making less power with the low compression pistons. Like he said all it needs is a turbo bolted up
Last edited by Tek310; Aug 20, 2011 at 08:39 PM.
Thread Starter
|
Newest Of Newbies
Joined: Jul 2011
Posts: 14
From: Villa Rica, GA 30180 this was where I ment :)
Thanks guys im excited although I dont really grasp how much my life will change!!
As for the car yeah hate to sell it cause it hasnt given me problems but drive around in an h22a accord or use that for the baby and start a college fund....
As for the car yeah hate to sell it cause it hasnt given me problems but drive around in an h22a accord or use that for the baby and start a college fund....
