Finally got around to taking some pics of just some of the parts I have from my old 95.

EDIT: Dont mind the sensor dust on my dSLR

First up:

Eibach Pro-Kit Lowering Springs PN# 4011.40 $145 + Shipping
Drop: 1.2" F/ 1.2" R
Fits: 1990-1997 Accord 4cyl. Coupe/Sedan

Bought these from the Tire Rack and put them on my 95 with stock OEM dampers. Used them for about 6,000 miles, no sagging, great ride, minimal drop with enhanced driving performance.






Honda/Stanley OEM Tail Lights $40 + Shipping

These have been wet sanded to 1200 grit, then polished twice with Meguires PlastX, also very slightly tinted with amber lens delete. Need a touch-up polish, as they have been sitting for some time. Foam gaskets included.






94-97 Accord Euro Clear Parking Lamps $10 + Shipping

Bought from Rock Auto, they look great and match up seamlessly to the OEM headlights.






Acura Integra Spoiler $20 + Shipping

No clue what year this will fit, it was a gift from my grandpa, lol. Its about 3 inches wider than an Accord trunk, so Im guessing early 90s Integra.





Other parts I have that are not listed:

- F22 Alternator
- F22 A/C Compressor
- F22B2 Non-VTEC Cylinder Head (In pieces)
- F22 Upper Intake Manifold w/ Throttle Body & TPS (Freshly cleaned IACV, FITV and butterfly)
+ many more random parts (interior)

 

damn finch selling 5g parts, wish I could help you out and take some of them off your hands, a little tempted on those stock corner lenses.............wouldnt happen to have the stock bumper lenses would ya? actually stupid me they wouldnt fit my car

and those tail lights are CLEAN

 

Hells yes, they were sexay!

I have the stock bumper lights, but one has a rock hole in it, lol, hence why I didn't post them up. Why wouldn't they fit?

 

judging by your tail lights you had a 94-95, i have a 96-97, the bumper lights are very different.

hey you wouldnt happen to have the center console thing would you, like where the radio and clock go

 

I thought you were talking about the bumper lights not fitting, yeah I had a 94-95, you could get a 94-95 trunk it would look soooo much sexier.

I had the center console, but after I totaled the car I sold the console to Tyler (19Accord97) for his double-DIN custom console thingy (THAT HE STILL HASN'T STARTED).

 

nah the bumper lights are different, and you cant just swap tail lights/trunks...........sadly it doesnt work, honda made them just different enough so it wouldnt work.

94-95


96-97


note how much bigger the 96-97 ones are.

i'm thinking i'm going to take those corner lenses off your hands cause i dont have stock ones, just trying to think if i need any other interior parts while i'm at it..........hmmmmm

and how much you want for the switch assembly just cause it wouldnt be a bad idea to have a spare

 

and did you include the pocket that goes below the radio with it to 19accord97(hey man since your not using it......want to sell it to me lol, my friend is learning how to wrap things in carbon fiber so i figured i would give him something to practice on)

 

would those springs benefit my 94 accord lx?

 

You want the OEM corners? And the switch for $5... I'm really not trying to make a profit, just need to free up from in the garage ahah so I can stash more 6th gen parts.

I don't have the pocket... The OEM radio was double din and the headunit kit I bought just had a blank plate where a pocket should be.

I have the entire dash trim/HVAC controls thing if you want that wrapped in carbon hahah. And a few other things... just ask me and I'll see if I have it.

 

damn $15 for corners and the headlight/wiper switchs you have yourself a deal, also ill take the ***** for the controls if you dont mind cause those little guys always break, what do you want for those

and shipping to 03431