For Sale is a used turbo kit, NOTHING wrong with any of the parts in it – pretty much ready to plug & play, aside from a resistor box ($35) and a maybe one or two fittings, and obviously a boost controller of your choice.

Tuned richer [safest] (as opposed to leaner) at 7PSI with <CROME>, ready for install!

Disclaimer: When installing a turbo setup, a fresh tune is ALWAYS recommended even if engine and specs are the same. Please be sure to check all gaskets, bolts, and fittings for integrity during assembly to prevent any exhaust / fluid leaks.

The hardware is a DRAG Gen III original turbo Kit, fits flawlessly with both AC & Power Steering. Everything else is included, as much as possible to have it plug & play for the user.

Itemized components include as follows:

[+] Turbonetics T-15396, T3/T04E, 57 Trim, 0.63 AR, 5-Bolt Exhaust Side Flange (NO shaft play, NO leaking seals)
[+] DRAG Cast Iron Exhaust Manifold With EGR Probe Port
[+] Denso 480cc Injectors (Flowmatched, Flowtested by Deatschwerks in Oklahoma City)
[+] Blitz Dual Drive Blow-off Valve
[+] Tial 38mm Wastegate
[+] DRAG Intercooler & Piping
[+] Socketed & Chipped P28 ECU
[+] Boomslang OBD2B to OBD1 Conversion Jumper Harness
[+] Custom Internally Routed Dump Tube
[+] Custom 2.5” Downpipe with Dump Tube Extension
[+] OBD1 IACV, With 2-Wire Plug, and Blacktraxx Blockoff Mounting Plate
[+] Clampco T-Bolt Clamps All Around (Except for a few band clamps)
[+] Blue Silicone Couplers
[+] Black Cone Filter
[+] Steel Braided Oil Return Line With -10 AN Fittings
[+] Goodridge Steel Braided Oil Feed Line
[+] Oil Pan Tapped for -10 AN Oil Return Line

ASKING: $2,000 SHIPPED to your door anywhere in the United States, and of course with delivery confirmation and proper insurance on each package of shipment.

Reference: When I bought my turbo build components, I paid $1,800 shipped for JUST the turbo hardware, not including new P28, new harness, OBD1 swap components, tapping oil pan, various fittings, and downpipe refurbishing - so as a complete set this should be a pretty damn good deal for someone wanting to turbo their 6thgen with most of the stuff already put together and taken off a working setup!

























NOTE: As always - transaction is to be completed through verified PayPal secure payment.

Please feel free to PM me with interest, or contact me directly at: (405) 826-4128. Texting is best, but calls work too.

Please keep all comments, as well as unrelated questions and chat out of this thread. I will only part this kit out if it can be coordinated that most of the parts are spoken for and get sold. If no one buys the kit whole, I will only sell it piece by piece at MY prices, which I guarantee will be much higher than buying it all together.

Thank you for your interest.



- Nikita

 

if your willing to part out the turbo...how much?

 

PM'd.

 

Good post and pictures..Than You.