Honda Accord Forum - Honda Accord Enthusiast Forums
2 2011/04/16 16:04:07
cutting job
cutting job
2 2011/01/17 21:17:39
1 2010/10/30 09:14:28
Out of the paint shop Oct. 28th 2010 (ODO 233078)
Out of the paint shop Oct. 28th 2010 (ODO 233078)
1 2010/10/30 09:11:12
after a few years cancer spread through out the whole body... time to sand
after a few years cancer spread through out the whole body... time to sand
1 2010/10/15 21:19:57
1 2010/10/15 21:19:57
sun burnt top
sun burnt top
1 2010/10/15 21:18:56
1 2010/10/05 07:40:41
photo
photo
0 2011/09/11 10:34:13
photo (1)
photo (1)
0 2011/09/11 10:34:13
BMW
BMW
0 2011/09/11 10:31:03
DIY front MM... gives a little vibration at idle but butters out breaking away
DIY front MM... gives a little vibration at idle but butters out breaking away
0 2011/04/19 21:40:48
Collin the duck
Collin the duck
0 2011/04/16 16:04:07
0 2011/04/16 16:04:07
2 F23A1
2 F23A1
0 2011/04/16 15:59:51
F23A1
F23A1
0 2011/04/16 15:59:51
Cheese!
Cheese!
0 2011/04/10 15:30:41
0 2011/03/10 17:37:40
0 2011/01/22 07:48:24
mag 14805 muffler
mag 14805 muffler
0 2011/01/19 13:51:50
mag 14805 muffler
mag 14805 muffler
0 2011/01/19 13:51:50
the 2' resonator to separate me from the Civics ;0) mag 10436
the 2' resonator to separate me from the Civics ;0) mag 10436
0 2011/01/19 13:51:50
so here is the plan: cut off the front license plate mount and recess it so its flush with the bumper and then cut and eliminate the middle fin where the honda emblem was
so here is the plan: cut off the front license plate mount and recess it so its flush with the bumper and then cut and eliminate the middle fin where the honda emblem was
0 2011/01/17 21:13:35
IMG00068 20101119 1937
IMG00068 20101119 1937
0 2011/01/17 21:13:35
13K low beams and 10k high beams
13K low beams and 10k high beams
0 2011/01/17 21:13:35
$550 later
$550 later
0 2010/10/30 09:20:37
I did a little cut and paste on the front bumper
I did a little cut and paste on the front bumper
0 2010/10/30 09:14:28
Right before it rolls into the paint shop
Right before it rolls into the paint shop
0 2010/10/30 09:11:12
stereo wiring :D
stereo wiring :D
0 2010/10/15 21:19:57
Day one October 6th 2010 - The sanding begins
Day one October 6th 2010 - The sanding begins
0 2010/10/15 21:18:56
0 2010/10/15 21:18:56